Netatmo Forum

I have the thermostat connected to boiler + 7 valves and relay connected to wall AC plug since 2 years. Since last month I noticed that relay is blinking sometime (1-2-3 times during nithg) during the night. I did not noticed this behaviour before. It seems to blink 4-5 times and then it stops. If i...

I confirm you that since two weeks ago when I changed the batteries with new lithium ones, the valve issue disappeared. No heathing without request from the valve anymore.

My experience at this time was that the problem surfaced after some time since I last changed batteries. At this point I used only alkaline type of batteries. I wondered if the problem could be the discharge curve of alkaline batteries and the decreasing terminal voltage that caused the problem. Ab...

just for your info, in case it happens to someone else, the battery status on the thermostat display was the right one than the status shown in the app.
today the thermostat batteries died without any notification altough the app showed them near 50%.

I see different charging status in the thermostat display ( very low near completely discharged) than status in the app (near 50%)
Which one is the truth?

I have firmware v197/71 and valves on 73.
(sorry, photo displayed with wrong rotation)

No sun here these days. Radiator is hot, due to valve not closing. I had this last year, it mostly worked for the old FW, but FW 73 that was applied yesterday basically broke it completely. I've been to all those WD40 recommendations. I saw in the French forum to take out batteries and run a calibr...

I have recalibrated all valves again, but nothing changes. There are still 4 valves over 7 heating without need when one radiator in other room requires heating. It seems that v197 reintroduced this bug solved by 193. Reading the french forums it seems that this bug happens in some cases. I will try...

Is this issue was resolved in the newest firmware v197? Could you check your firmware for v197 and then check for your issue still exist or resolved? Since today I have 197/71/73 too so I will tell you in the next days. Upgrade was triggered by an issue I have with Homekit , so yesterday I had to r...

The issue has been completely solved by firmware 193. I waited some days to do some tests changing manually the temperature on radiators and by leaving them operating automatically under comfort option. In all cases now when one or more radiators need heat all the remaining are correctly cold with t...

me too after last month upgrade to v189. I had only one valve reporting battery drain so I changed the batteries, but using a voltmeter tester both are still in good conditions as all the other valves. I've just manually upgraded rele to v193 using Usb cable and wizard, so I will wait 1-2 days to le...