Netatmo Forum

Hello 1R5 doesn7t seem to be a capacitor but an inductor.
About the other capacitor i think you need a crazy guy with a working camera who want to de-solder the capacitor and measure their value.
Sorry but I don't have this product.

Wow that impressive (on the bad way ...) have you try to message a moderator ?

Bonjour,
Normallement le capteur a une calibration automatique.
Celle ci peut prendre de une a deux semaine.
Dans tout les cas raprochez vous du support technique si vous avez des inquietude.

Hi, I don't mean the IP address of the Netatmo devices... I mean the IP addresses on the internet that it needs to talk to for firmware updates etc. I can't find any reference to these requirements. I am pretty sure that one is not fixed as a lot of different services. So i don't know how you will ...

Normally IP address are from the DHCP server.
Look at the server logs you should be able to find the MAC address of the Netatmo.
Btw the serial number are the last digit of the mac address

Indeed

Another thing, some phone camera can see IR light.
Try one with your phone and a remote control.
and if the phone see the IR light also try with the camera IR led

i will say water/moisture in the sensor which short out the antenna ?
could you use a flashlight in the battery compartment to see if there is any strange trace on the contcacts ?

Stupid idea but have you tried to run it without the black IR screen ?
just to see if it is the problem ?
Maybe the ir LED has got some trouble and run too hot (which will burn the plastic but also make it's power supply chip thermal shut down) ...

it's a nice to know feedback.
Indeed always upgrading the security is a good thing to do.