Hi my smart Anemometer periodically stops sending data. It is exactly the same distance from the base station as my rain gauge, and shows 100% battery and 4/5 bar signal strength. As far as I can see it is still connected but has given up sending wind data. Removing the batteries and re-inserting them fixes the issue. This happens every couple of weeks. The firmware version is 25. Firmware for the base station is 181.
Any suggestions? Should I return for replacement? Is there a way of remote resetting or getting diagnostics?
Kind regards,
Keith
Anemometer stops sending data periodically
Re: Anemometer stops sending data periodically
Hi,
I have exactly the same issue since a couple of days. The weird thing is that it is mostly on the same time slot each day (which you can check when viewing the graphs with historical data): 09:30 - 21:30. During that timeframe the anemometer is still available in the app but the icon does not present an actual winddirection and only old wind speeds.
I had the same issue last December (shortly after I bought and installed the meter). I could then also only resolve this by removing the battery.
I’m considering exchanging it for a new anemometer but suggestions are highly appreciated.
Kind regards,
John.
I have exactly the same issue since a couple of days. The weird thing is that it is mostly on the same time slot each day (which you can check when viewing the graphs with historical data): 09:30 - 21:30. During that timeframe the anemometer is still available in the app but the icon does not present an actual winddirection and only old wind speeds.
I had the same issue last December (shortly after I bought and installed the meter). I could then also only resolve this by removing the battery.
I’m considering exchanging it for a new anemometer but suggestions are highly appreciated.
Kind regards,
John.
Re: Anemometer stops sending data periodically
Hi,
I got the same problem and mine have been replaced. The new have the same problem
Kind Regards,
Jacob
I got the same problem and mine have been replaced. The new have the same problem
Kind Regards,
Jacob
-
- Posts: 6
- Joined: 31 Mar 2021, 10:22
Re: Anemometer stops sending data periodically
Hi, I did exchange mine for a new Anemometer.
I found a very short term workaround was to do a HomeKit 'identify' on the device (you need an app like Controller because the default iOS 'home' app won't allow you to do this on 'Not Supported' items like an Anemometer). After the identify the device starts sending data again (most of the time). Removing the batteries is the most sure-fire solution, except who wants to climb on the roof and mess around with a screwdriver.
I've got a v4 Weather Station running fw 181 and the Anemometer is running fw 25.
I found a very short term workaround was to do a HomeKit 'identify' on the device (you need an app like Controller because the default iOS 'home' app won't allow you to do this on 'Not Supported' items like an Anemometer). After the identify the device starts sending data again (most of the time). Removing the batteries is the most sure-fire solution, except who wants to climb on the roof and mess around with a screwdriver.
I've got a v4 Weather Station running fw 181 and the Anemometer is running fw 25.
-
- Posts: 6
- Joined: 31 Mar 2021, 10:22
Re: Anemometer stops sending data periodically
Also worth noting that when supplied my Anemometer had fw 7, which is pretty out of date. Suggests that either they don't factory install up to date firmware or it's been sitting in a warehouse for a really long time.
Re: Anemometer stops sending data periodically
Does the fallout correspond with lots of sun and very high temperatures?
Re: Anemometer stops sending data periodically
Hi,
Yes it seems as it corresponds. When temperature rises it happens
Thanks
Jacob
Yes it seems as it corresponds. When temperature rises it happens
Thanks
Jacob
- Attachments
-
- Screenshot 2021-04-22 160838.png (33.54 KiB) Viewed 2354 times
Re: Anemometer stops sending data periodically
Yep… same has happened with me with my anenometer. I emailed the Netatmo support with the issue, got a reply from them, and then sent some screen grabs to show the issue but have got no reply in almost a month. Don't bother with support, they are hopeless and never follow up! Pretty disappointing.
I reckon the problem has to do with the new ios app version which was updated in the late few weeks, as it never happpened with previous version.
I reckon the problem has to do with the new ios app version which was updated in the late few weeks, as it never happpened with previous version.
-
- Posts: 6
- Joined: 31 Mar 2021, 10:22
Re: Anemometer stops sending data periodically
I've had some reasonable responses from Netatmo support via Twitter. They seem to be happy to investigate and have some options to log on remotely.
I created a simple app that records the last updated date for each of the nodes just to keep an eye on the situation. It also means that when I talk to support I can at least point easily to date and times when problems occured.
I created a simple app that records the last updated date for each of the nodes just to keep an eye on the situation. It also means that when I talk to support I can at least point easily to date and times when problems occured.
Last edited by WattonSouth on 23 Apr 2021, 12:35, edited 1 time in total.
-
- Posts: 6
- Joined: 31 Mar 2021, 10:22
Re: Anemometer stops sending data periodically
Oh yeah, my Main unit is called Main, the outside temp and humidity is called 'Chilly', the rain gauge is called 'Soggy' and the Anemometer is called 'Windy'.