Humidity on my Outside station stuck at 100%

Tips, tricks and frequently asked questions
Post Reply
mosaix
Posts: 1
Joined: 03 Aug 2020, 17:22

Humidity on my Outside station stuck at 100%

Post by mosaix » 03 Aug 2020, 17:30

Since about 2 weeks, the humidity on my Outside unit is always stuck at 100%, but the temperature works fine.

The unit is protected from the rain, and it worked fine for the last 3 years.

Any help would be grateful.

GEORGzer
Posts: 1575
Joined: 14 Jan 2014, 18:14

Re: Humidity on my Outside station stuck at 100%

Post by GEORGzer » 03 Aug 2020, 19:09

This is usually the case when the module got wet.
Take it inside and pull of the aluminium casing and wait a couple of hours. If the reading starts to go down again then I would leave it over night and the next day you can put everything back together and return the module outside.
Home:Weather Station (V3 + Rain Gauge, Wind Gauge, 3 additional Indoor Modules), Valves Starter Pack + 5 additional Valves, Smart Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smart Smoke Alarm

Not a Netatmo employee

Post Reply

Return to “General questions”