Anemometer, wind speed and unit selection/reading

Tips, tricks and frequently asked questions
Post Reply
Yngve60
Posts: 1
Joined: 25 Sep 2021, 21:22

Anemometer, wind speed and unit selection/reading

Post by Yngve60 »

Hi

I have the Netatmo app on my iPhone 8 and Iuse m/s as unit for anemometer wind speed. This works perfectly in the main screen, but when I flip the phone to display wind graph Iget wind speed displayed in mph. One or to days ago I had the same unit reading both on main screen and in the wind graph, as it should be. I have tryed to alter through all available units and I see there is some inconsistency regarding this. For some units I get the same unit reading at both screens (main and graph) and for some units different unit reading in main- and graph screen.

When I select km/h in units selection, I read km/h in both main screen and graph.
When I select mphh in units selection, I read mph in main screen and kt in graph.
When I select m/s in units selection, I read m/s in main screen and mph in graph.
When I select Bft. in units selection, I read Bft. in main screen and m/s in graph.
When I select kt. in units selection, I read kt. in main screen and Bft. in graph.

This is annoying and must be an error.

Any suggestion how to solve this?

Regards Yngve
Post Reply

Return to “General questions”