I received my additional indoor module yesterday. I put the ganez today on the windowsill and started the calibration. After the whole thing was done I put the indoor station in the unused bedroom. CO2 continues to rise although there is no one and the window is tilted.
Then I put the station ~2.50m next to the main station in the living room. Here, too, CO2 just continues to rise, while the main station can basically no longer measure any increase.
Translated with www.DeepL.com/Translator (free version)
Large differences main module / indoor module
Large differences main module / indoor module
- Attachments
-
- tempsnip.png (225.94 KiB) Viewed 889 times
Re: Large differences main module / indoor module
Day 2. Modules in the same room, windows was open all the day and there was a new try to calibrate it. No luck. Next step is delete the module and start from scratch. After that? Give it back to ama....
- Attachments
-
- Unbenannt.JPG (81.51 KiB) Viewed 869 times
Re: Large differences main module / indoor module
A new day. The modules did not want to provide anything like the same values.
Calibration is currently being carried out again on the outside of the window. 4°C on a grey German day.
At least the humidity is somewhat correct. I was aware that these are not identical and can deviate by up to 10%.
Calibration is currently being carried out again on the outside of the window. 4°C on a grey German day.
At least the humidity is somewhat correct. I was aware that these are not identical and can deviate by up to 10%.
- Attachments
-
- Unbenannt2.JPG (94.03 KiB) Viewed 850 times
-
- Unbenannt.JPG (58.68 KiB) Viewed 850 times
Re: Large differences main module / indoor module
Last one. Im not willing to make more tests.
Calibration is done. Both modules ar in the living room, ~1,50m space between.
100% Drift between ? Just send a mail to the support, but i guess this was not my best deccision to buy this.
Calibration is done. Both modules ar in the living room, ~1,50m space between.
100% Drift between ? Just send a mail to the support, but i guess this was not my best deccision to buy this.
- Attachments
-
- Bild 3.JPG (78.16 KiB) Viewed 844 times