Anemometer Update!

Tips, tricks and frequently asked questions
uptime
Posts: 5
Joined: 15 Jan 2016, 17:36

Re: Anemometer Update!

Post by uptime » 18 Jan 2016, 11:42

Hi Brieuc_Netatmo,

Please force the update to my device. l00821a.

Thank you!

KaiUwe
Posts: 26
Joined: 13 Jun 2014, 09:28

Re: Anemometer Update!

Post by KaiUwe » 18 Jan 2016, 11:51

l004f82
l0052ea

EDIT:
That was very fast, thank you @Brieuc_Netatmo! Fingers crossed that this firmware will fix some of the problems! Is there a changelog yet?
Last edited by KaiUwe on 18 Jan 2016, 15:40, edited 1 time in total.

scifi0425
Posts: 30
Joined: 25 Jul 2014, 04:18

Re: Anemometer Update!

Post by scifi0425 » 18 Jan 2016, 14:37

100a744

Brieuc_Netatmo
Posts: 2966
Joined: 02 Jan 2014, 11:20

Re: Anemometer Update!

Post by Brieuc_Netatmo » 18 Jan 2016, 15:32

@scifi0425: this is not a valid serial number. The first character must be a letter.
Brieuc - Netatmo Team

scifi0425
Posts: 30
Joined: 25 Jul 2014, 04:18

Re: Anemometer Update!

Post by scifi0425 » 18 Jan 2016, 15:37

Brieuc

Upon closer inspection it was a lower case L. Sorry

l00a744

Thank You

Brieuc_Netatmo
Posts: 2966
Joined: 02 Jan 2014, 11:20

Re: Anemometer Update!

Post by Brieuc_Netatmo » 18 Jan 2016, 15:40

Thanks, done! :)
Brieuc - Netatmo Team

Dinosaure34
Posts: 18
Joined: 08 Dec 2015, 16:49

Re: Anemometer Update!

Post by Dinosaure34 » 18 Jan 2016, 15:44

Merci je suis en version 13.
Je surveille !!!!

Phip
Posts: 159
Joined: 09 Feb 2014, 13:58

Re: Anemometer Update!

Post by Phip » 18 Jan 2016, 16:56

Hi Brieuc !

Je suis en V11 et je me suis tapé aussi des valeurs à 150km/h tout l'après midi. Une petite gelée ce matin suivi de soleil et paf des valeurs bizarres...

Je suis monté voir, et à ma grande surprise, il y avait pas mal de condensation dans le logement à piles... J'ai séché l'intérieur et c'est maintenant reparti mais c'est bizarre pour un appareil prévu pour l'extérieur non ? J'ai l'impression que l'axe central n'est pas tout à fait étanche, l'écrou qui maintient le tout dans le logement est déjà rouillé... Ou alors c'est la condensation...

Merci pour la mise à jour (i001f32),

Philippe
Thermostat j0347f4

Brieuc_Netatmo
Posts: 2966
Joined: 02 Jan 2014, 11:20

Re: Anemometer Update!

Post by Brieuc_Netatmo » 18 Jan 2016, 17:24

Hi Phip,
Please try to speak english in the english forum.
I've updated your Station, but if your Wind Gauge is infiltrated by water, please contact us at support, it has to be repaired or swapped, it's not normal at all.
Brieuc - Netatmo Team

Phip
Posts: 159
Joined: 09 Feb 2014, 13:58

Re: Anemometer Update!

Post by Phip » 18 Jan 2016, 18:05

Thanks a lot Brieuc !

I will watch in the coming weeks.

My english is very poor... :-)
Thermostat j0347f4

Post Reply

Return to “General questions”