Good morning,
I've been trying different homemade solutions for putting the outdoor module outside in a good location and with the proper setup to get good measures, but I haven't found yet a way that could be consider totally good (either too shadow or not exposed to air enough, too humid, too near the house...). I know that the outdoor temp and humidity module are not bad by itself, but the case is not the best to put it in a good place.
My next try will be like this: [I can't post URLs so sorry... but search in Google stevenson screen and pot saucers] and that will go to the pole in the roof where I have the anemometer and rain gauge, more or less 7,5 meters over the floor.. (picture attached)
He uses pot saucers to make the radiation shield, which is a good idea if you find a pot saucers with the correct plastic resistant to sunlight.
Any forum user is thinking on something like this or has already done one or bought one? I would like to know your experiences. Thanks!
Best regards
/José Luis
Stevenson screen or radiation shield for outdoor module
Stevenson screen or radiation shield for outdoor module
- Attachments
-
- anemopluvio.jpeg (380.55 KiB) Viewed 15932 times
Re: Stevenson screen or radiation shield for outdoor module
I had difficulty with poor readings till I bought a Ambient Weather SRS100LX Temperature and Humidity Solar Radiation Shield on Amazon for about $40. It now is in direct sunlight and gives good readings.
Re: Stevenson screen or radiation shield for outdoor module
Thanks for the reply. I have been searching and there is very few offer of radiation shields to buy in Spain, at least in the known online stores. There is something but either very expensive or imposible to adapt for netatmo (too small)scifi0425 wrote:I had difficulty with poor readings till I bought a Ambient Weather SRS100LX Temperature and Humidity Solar Radiation Shield on Amazon for about $40. It now is in direct sunlight and gives good readings.
That one is not available to buy for where I live (Spain) and amazon.es doesn't have it... damn! because it looks really really good.
Re: Stevenson screen or radiation shield for outdoor module
Hi
I did some small adjustments on a radiation shield from an old Fine Offset station...(WH1080 I belive it was)
My readings did improve by far after this modification. And its weatherproof
Sorry for the poor quality of the photo
I did some small adjustments on a radiation shield from an old Fine Offset station...(WH1080 I belive it was)
My readings did improve by far after this modification. And its weatherproof
Sorry for the poor quality of the photo
- Attachments
-
- IMG_1498.JPG (285.16 KiB) Viewed 15932 times
Netatmo Weather Station, rain and wind gauge.
Netatmo Presence Outdoor Camera.
Netatmo Smart Video Doorbell.
Netatmo Presence Outdoor Camera.
Netatmo Smart Video Doorbell.
-
- Posts: 5
- Joined: 05 Oct 2015, 07:42
Re: Stevenson screen or radiation shield for outdoor module
Protezione Tfa Per Trasmettitore Esterno 98.1114.02
https://www.amazon.it/dp/B017ILZF6C/ref ... BHOJHXMV7Z
https://www.amazon.it/dp/B017ILZF6C/ref ... BHOJHXMV7Z
Re: Stevenson screen or radiation shield for outdoor module
I have that transmitter too and its way thinner than the netatmo outdoor device, does it fit in it?mscucciari wrote:Protezione Tfa Per Trasmettitore Esterno 98.1114.02
https://www.amazon.it/dp/B017ILZF6C/ref ... BHOJHXMV7Z
In anyway, it's not sold in Spain, at least I don't find it... damn!
-
- Posts: 15
- Joined: 31 Jul 2016, 01:13
Re: Stevenson screen or radiation shield for outdoor module
Hi
Having experienced the common problem with the Outdoor unit of batteries lasting not months but only days, I ordered a replacement unit which had been perfect for the last 3 weeks.
As I am not totally convinced about the long term weatherproofing of the Outdoor Unit, I have decided to purchase for £19 on eBay a housing unit to protect the unit. It's a very simple plastic housing into which the Outdoor unit simply slides with no problem at all.
Just search for - TFA Dostmann TFA 98.1114.02 Case For External Sensor Weather Protection Cage Protection
Having experienced the common problem with the Outdoor unit of batteries lasting not months but only days, I ordered a replacement unit which had been perfect for the last 3 weeks.
As I am not totally convinced about the long term weatherproofing of the Outdoor Unit, I have decided to purchase for £19 on eBay a housing unit to protect the unit. It's a very simple plastic housing into which the Outdoor unit simply slides with no problem at all.
Just search for - TFA Dostmann TFA 98.1114.02 Case For External Sensor Weather Protection Cage Protection