Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Suggestions, features and new ideas
GTD
Posts: 2
Joined: 30 Dec 2018, 13:34

Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by GTD » 30 Dec 2018, 13:59

Hi there,

as the issue of the missing feature has been discussed here https://forum.netatmo.com/viewtopic.php?f=42&t=15215, I propose to gather the support for this request in a dedicate thread (here).

So everybody supporting this request just briefly answer bere.

Thanks and best regards
GTD

saba
Posts: 12
Joined: 21 Aug 2017, 10:08

Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by saba » 01 Jan 2019, 14:24

+1. time for this "smart device" to get smart...

frav
Posts: 25
Joined: 16 Mar 2016, 18:21
Location: Sweden (Westcoast)

Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by frav » 02 Jan 2019, 19:12

+1
Fredrik from Sweden
2x Netatmo Urban Weather Station, 6x extra indoor sensors, 2x Rain Gauge, 2x Wind Gauge
6x Netatmo Presence, 2x @ 128GB Samsung Pro microSDXC [R90/W80] (MB-MG128E), 4x @ 32GB SanDisk Extreme Pro microSDHC [R100/W90] (SDSQXCG)

Jarves 80
Posts: 8
Joined: 28 Feb 2016, 11:56

Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by Jarves 80 » 06 Jan 2019, 23:17

+1



Stefan83
Posts: 8
Joined: 12 Aug 2018, 07:30

Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by Stefan83 » 18 Jan 2019, 17:18

+1
any news on that?

Simon_the_Fin
Posts: 8
Joined: 07 Jan 2019, 17:26

Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by Simon_the_Fin » 20 Jan 2019, 18:58

+1. "Rebooting" Presence means that I need to cut power from the fuse board, but luckily I have the WiFi router on a different fuse, so I can start the WiFi router first and then the Presence.

Zet
Posts: 8
Joined: 12 Oct 2017, 22:08

Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by Zet » 30 Jan 2019, 22:08

+1

ChrisL
Posts: 4
Joined: 04 Feb 2019, 15:59

Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by ChrisL » 04 Feb 2019, 16:04

+1 Option to reboot NetAtmo devices remote would be nice too.

Post Reply

Return to “Feature requests”