Hi there,
as the issue of the missing feature has been discussed here https://forum.netatmo.com/viewtopic.php?f=42&t=15215, I propose to gather the support for this request in a dedicate thread (here).
So everybody supporting this request just briefly answer bere.
Thanks and best regards
GTD
Feature request: Implement IEEE 802.11v/k for WiFi Mesh
Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh
+1. time for this "smart device" to get smart...
Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh
+1
Fredrik from Sweden
2x Netatmo Urban Weather Station, 6x indoor sensors, 2x Rain Gauge, 2x Wind Gauge
9x Netatmo Presence @ 64GB Kingston High Endurance microSDXC [R95/W30] (SDCE64GB)
2x Netatmo Urban Weather Station, 6x indoor sensors, 2x Rain Gauge, 2x Wind Gauge
9x Netatmo Presence @ 64GB Kingston High Endurance microSDXC [R95/W30] (SDCE64GB)
-
- Posts: 134
- Joined: 20 Nov 2017, 22:22
Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh
+1
NAC Beta Tester
Mac: 70:ee:50:94:65:32
Mac: 70:ee:50:94:65:9c
Product firmware version: 1015
OS Version: iOS 16.4.1
Netatmo Home+Control app version used: 2.23 (189)
Mac: 70:ee:50:94:65:32
Mac: 70:ee:50:94:65:9c
Product firmware version: 1015
OS Version: iOS 16.4.1
Netatmo Home+Control app version used: 2.23 (189)
-
- Posts: 5
- Joined: 21 Dec 2018, 13:41
Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh
+1
any news on that?
any news on that?
-
- Posts: 17
- Joined: 07 Jan 2019, 17:26
Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh
+1. "Rebooting" Presence means that I need to cut power from the fuse board, but luckily I have the WiFi router on a different fuse, so I can start the WiFi router first and then the Presence.
Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh
+1 Option to reboot NetAtmo devices remote would be nice too.