Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Suggestions, features and new ideas
GTD
Posts: 7
Joined: 30 Dec 2018, 13:34

Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by GTD »

Hi there,

as the issue of the missing feature has been discussed here https://forum.netatmo.com/viewtopic.php?f=42&t=15215, I propose to gather the support for this request in a dedicate thread (here).

So everybody supporting this request just briefly answer bere.

Thanks and best regards
GTD
saba
Posts: 14
Joined: 21 Aug 2017, 10:08

Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by saba »

+1. time for this "smart device" to get smart...
frav
Posts: 72
Joined: 16 Mar 2016, 18:21
Location: Sweden (Westcoast)

Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by frav »

+1
Fredrik from Sweden
2x Netatmo Urban Weather Station, 6x indoor sensors, 2x Rain Gauge, 2x Wind Gauge
9x Netatmo Presence @ 64GB Kingston High Endurance microSDXC [R95/W30] (SDCE64GB)
TommasoSan
Posts: 134
Joined: 20 Nov 2017, 22:22

Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by TommasoSan »

+1
NAC Beta Tester
Mac: 70:ee:50:94:65:32
Mac: 70:ee:50:94:65:9c
Product firmware version: 1015
OS Version: iOS 16.4.1
Netatmo Home+Control app version used: 2.23 (189)
Stefan83
Posts: 20
Joined: 12 Aug 2018, 07:30

Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by Stefan83 »

+1
any news on that?
Simon_the_Fin
Posts: 17
Joined: 07 Jan 2019, 17:26

Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by Simon_the_Fin »

+1. "Rebooting" Presence means that I need to cut power from the fuse board, but luckily I have the WiFi router on a different fuse, so I can start the WiFi router first and then the Presence.
Zet
Posts: 10
Joined: 12 Oct 2017, 22:08

Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by Zet »

+1
ChrisL
Posts: 6
Joined: 04 Feb 2019, 15:59

Re: Feature request: Implement IEEE 802.11v/k for WiFi Mesh

Post by ChrisL »

+1 Option to reboot NetAtmo devices remote would be nice too.
Post Reply

Return to “Feature requests”