Preffered Access point

Suggestions, features and new ideas
Post Reply
Posts: 28
Joined: 05 Sep 2019, 19:38

Preffered Access point

Post by maverick_i » 07 Oct 2019, 22:51


I have the proposal to tell the camera a prefered mac access point to connect in the case there is a wifi mesh infrastructure.
In mesh configuration, the camera just connects to the first AP it finds, not the strongest one.
If not prefered mac to connect with, then the camera can connect the way it connects now.

This can also be applied to the Indoor camera.

I hope this can be taken into consideration.

Last edited by maverick_i on 01 Dec 2019, 16:07, edited 1 time in total.
Presence Camera x3 FW184, Welcome Cameras x3 FW 456, Sensor Tags x6 FW58.
Weather Station V3 FW178, Outdoor Module FW50, + Rain Gauge FW12, Wind Gauge FW25, Indoor Modules x3 FW50.

Posts: 3
Joined: 30 Nov 2019, 23:05

Re: Preffered Access point

Post by Kamerakash » 01 Dec 2019, 01:43


Posts: 3
Joined: 03 Mar 2020, 12:03

Re: Preffered Access point

Post by marc963 » 03 Mar 2020, 12:09

basically you want IEEE 802.11v/k Support.

but yeah, +1

Post Reply

Return to “Feature requests”