Deactivate Video Detection for a time period (for a alert zone)

Suggestions, features and new ideas
Post Reply
Guzzi
Posts: 5
Joined: 14 Feb 2020, 11:39

Deactivate Video Detection for a time period (for a alert zone)

Post by Guzzi »

One on my camera detect motion on the terrasse. In the summer time when we are on the terrasse the camera always films us too. So when I search a video of a few days I can't find because there are to much videos of us sitting or walking on terrace.
When I deactivate the detection then often I forget it to activate again.

Thatfor it is needed to have the possibility to
  • configure a time, when the camera to activate again or
  • to configure a time period to deactivate the camera and after this time period the camera is activated again
  • to configure a alert zone to deactivate for a time period, so it is possible only deactivate a specified zone where I want see any alerts
hemorieder
Posts: 1
Joined: 05 Dec 2020, 10:28

Re: Deactivate Video Detection for a time period (for a alert zone)

Post by hemorieder »

+ 1

i guess it is also easy to add this feature, activating and deactivating the camera for a certain time should be enough for the start
Petruskie
Posts: 40
Joined: 06 Dec 2020, 09:33

Re: Deactivate Video Detection for a time period (for a alert zone)

Post by Petruskie »

+1
4 outdoor cameras (streaming to synology nas)
4 indoor cameras (streaming to synology nas)
1 smart door bell
2 smart thermostats (7 valves, relay)
2 Smart weather stations with 3 indoor outdoor wind,rain module
5 smoke alarm
2 carbon monoxide
megbo_b
Posts: 110
Joined: 06 May 2019, 12:04
Location: Manchester, UK

Re: Deactivate Video Detection for a time period (for a alert zone)

Post by megbo_b »

+1
Harlekin
Posts: 2
Joined: 06 Mar 2021, 20:16

Re: Deactivate Video Detection for a time period (for a alert zone)

Post by Harlekin »

http://“your IP here”/“your secret device id here”/command/changestatus?status=off should be an comfortable command to turn surveillance off or on. It would be nice to do this, but keep the floodlight function in auto mode active. (Right now it turns of camera light as well)
Post Reply

Return to “Feature requests”