Firmware Updates

Tips, tricks and frequently asked questions
Locked
Arthur_Netatmo
Posts: 594
Joined: 15 Jan 2020, 10:48

Firmware Updates

Post by Arthur_Netatmo »

Hello,

Please find below the changelog of the Doorbell firmwares:

v2.26.0 (December 4th, 2023)
Changelog:
- Fixes an issue leading sometimes to a loss of video functionalities.
- Fixes an internal service issue when the SD card is changed without powering-off the product.
- Fixes an issue causing some Doorbells on 230V electrical installation to fall into power-saving mode.
- Fixes an issue uploading to the Dropbox cloud when old API credentials are retained in the product configuration.
- Fixes an issue sometimes impacting a video recording and making it unplayable.
- Fixes a regression in FTP upload for storage paths including space characters.
- Improves the reliability of product installation with the H+S app.
- Fixes an issue causing the product to be seen as disconnected in the H+S app for an abnormal duration after product startup.


v2.22.4 (November 29th, 2022)
Changelog:
- Fix product stuck in night mode after a live streaming in some particular conditions.
- Fix a rare issue impacting the startup sequence that can cause loss of video functionality.
- Fix loss of Dropbox video upload user configuration after firmware upgrade.
- Fix rare regression impacting system startup sequence.
- Add Advanced Recording feature. In this mode the Doorbell will add the few seconds that precede a detection event in the video recordings. This mode is enabled dynamically if the electrical power is sufficient and if the product remains inside the correct temperature range.
- Improved network stability in case of DNS server issue.
- Fix the LED indicator remaining red after a call sometimes.
- Improve FTP upload server configuration compatibility.
- Use event date instead of upload date in FTP upload file names.
- Fix an issue causing the cloud upload to remain stuck sometimes.
- Security update.


v2.20.0 (January 20th, 2022)
Changelog:
- Add new chime settings to customize chime activation duration or disable it completely
- Add new chime quiet mode to silence it for a given duration
- Fix Dropbox and FTP video uploads that could remain stuck sometimes
- Fix an issue that could lead to an unplayable video recording
- Fix doorbell speaker ringing when button is hold for a long time
- Reset electrical configuration when product is removed from the app and factory reset
- Security patches


v2.18.0 (Septembre 21st, 2021)
Changelog:
- Chime from doorbell speaker when a visitor presses the doorbell button
- New firmware numbering system
- New Dropbox/FTP authentication mechanism
- Protection mechanism to avoid over usage of the IR filter

v102 (July 1st 2021)
Changelog:
- New temperature events in the timeline when the doorbell is too hot or too cold (Only visible on Android app or the Web app at my.netatmo.com for now)
- Bug fix on the product installation after a HomeKit Reset
- Bug fix on the relaunch of the pairing mode after a time-out during the installation process

v96 (May 26th 2021)
Changelog:
- Add compatibility with Amazon Alexa audio-only devices
- Improvements on the person detection algorithms
- Electrical doorbell protection for 230V installations: when the chime module is not configured correctly (other than 1-HIGH), the doorbell will not try to make the chime ring in order to protect the electrical components
- More robust SD card management, to prevent failures
- Fix issues during the product app installation
- Fix people detection remaining stuck in a particular case
- Improve overall stability

v92 (March 23rd 2021)
Changelog:
- Improve call establishment when using Turn servers
- Fix a websocket disconnection after an installation
- Fix a memory leak when a stream lasts too long

v91 (March 11th 2021)
Changelog:
- Calls answered with HomeKit no longer appear as missed in the Security timeline
- Fix a recording issue that prevents the user from playing and downloading the video
- Fix a rare issue causing events to disappear from the timeline
- Fix the low microphone volume issue occurring sometimes
- Fix a crash when finalizing a video clip
- Fix doorbell installation with app after installation mode timeout of 15min
- LED should no longer remain in fixed white after a network reconfiguration
- Fix doorbell installation with app when retrying after a failed one
- Fix endless Wi-Fi disconnections in loop that could happen in a particular case
- Fix doorbell switching into Wi-Fi access point mode after a long period of lost W-Fi connection
- Fix a case of missing firmware download or cloud storage events in timeline that could happen sometimes
- Fix a DNS resolution bug that occurred with some ISP
- Fix several process crashes

v82 (January 13th 2021)
Changelog:
- Add Full HD support for Netatmo streaming, recording and cloud uploading
- Bug fix: No sound from Doorbell on Home app when streaming outside local network
- Bug fix: Random Homekit disconnections

v80 (November 24th 2020)
Changelog:
- FTP & Dropbox storage
- SD card diagnostic metrics added
- Connectivity improved
- Bug fixed on video download

v74 (October 19th 2020)
Changelog:
- Reduce delay to establish the connection with the doorbell
- New LED behavior during factory reset (Blinking green)
- Add diagnostics metrics
- Bug fixed on the Blue LED (HomeKit LED) at startup
- Bug fixed on the Doorbell access point not visible after factory reset

v60:
- Factory version

***
NB: new firmwares are automatically pushed from our servers to the cameras. The firmware deployement on all products is progressive and all devices are updated few days or weeks after the release date.
Arthur - Product Manager
Locked

Return to “General questions”