Hi there!
I recently purchased and installed the doorbell and have the following problem.
Installation went smoothly, gong module was installed with dip switch settings LOW-1 and on first boot and after the setup I was prompted to update the firmware, which I did.
The app then told me to change the dip switch settings to LOW-2, which I did too.
So far everything was working as expected. I can connect to the camera and live stream the video in the best quality. That works just fine.
BUT, and here's the problem, the moment someone rings the bell and I get the notification on my iPhone, I connect the call by tapping the notification.
The call is established, I can see and hear the person at the door and can talk as well.
After only a few seconds though, the call stops, the picture freezes and the LED on the camera goes from red back to blue...
That is very consistent so far and happened on every single call... which is pretty annoying, since that is the main use case!
Does anyone has the same problem and has a solution? What does the dip switch do exactly, I can't find any documentation to the individual setting?
Thanks!
Video call stops after a few seconds
Tips, tricks and frequently asked questions
Re: Video call stops after a few seconds
Hi
Did you find any fix for this?
I have exactly the same issue as you. I’m on firmware 2.18.0. btw.
Did you find any fix for this?
I have exactly the same issue as you. I’m on firmware 2.18.0. btw.
Netatmo Weather Station, rain and wind gauge.
Netatmo Presence Outdoor Camera.
Netatmo Smart Video Doorbell.
Netatmo Presence Outdoor Camera.
Netatmo Smart Video Doorbell.
Jump to
- Forum Terms of Use
- Weather
- ↳ Smart Home Weather Station and its accessories (ENGLISH)
- ↳ General questions
- ↳ Setting up my Weather Station
- ↳ My Weather Station data
- ↳ Weather Station iOS Application
- ↳ Weather Station Android Application
- ↳ Weather Station Web Application
- ↳ Feature requests
- ↳ Station Météo Intelligente et ses accessoires (FRANCAIS)
- ↳ Questions générales
- ↳ Mes données météo
- ↳ Les applications iOS/Android/Web de la Station Météo
- ↳ Requêtes d'amélioration
- Security
- ↳ Security Cameras and accessories (ENGLISH)
- ↳ Smart Indoor Camera (Welcome)
- ↳ General questions
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Feature requests
- ↳ Smart Door and Window Sensors
- ↳ General questions
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Feature requests
- ↳ Smart Indoor Siren
- ↳ General Questions
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Feature requests
- ↳ Smart Smoke Alarm
- ↳ General questions
- ↳ Smart Outdoor Cameras (Presence) with or without Siren
- ↳ General questions
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Feature requests
- ↳ Smart Video Doorbell
- ↳ General questions
- ↳ Applications
- ↳ Feature request
- ↳ Electrical Wiring
- ↳ Caméras et accessoires de Sécurité (FRANCAIS)
- ↳ Caméra Intérieure Intelligente (Welcome)
- ↳ Questions générales
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Suggestions, idées d'améliorations
- ↳ Détecteurs d'Ouverture Intelligents pour Portes et Fenêtres
- ↳ Questions générales
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Suggestions, idées d'améliorations
- ↳ Sirène Intérieure Intelligente
- ↳ Questions générales
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Suggestions, idées d'améliorations
- ↳ Détecteur de Fumée Intelligent
- ↳ Questions générales
- ↳ Caméras Extérieures Intelligentes (Presence) avec ou sans Sirène
- ↳ Questions générales
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Suggestions, idées d'améliorations
- ↳ Sonnette Vidéo Intelligente
- ↳ Questions générales
- ↳ Applications
- ↳ Suggestions, idées d'améliorations
- ↳ Installation électrique
- Energy
- ↳ Smart Thermostats and Smart Radiator Valves (ENGLISH)
- ↳ Smart Thermostat
- ↳ General questions
- ↳ Attaching the Thermostat to the boiler
- ↳ Thermostat Network Set-up
- ↳ Thermostat iOS/Android/Web Application
- ↳ Smart Modulating Thermostat (OpenTherm)
- ↳ General Questions
- ↳ Attaching the Thermostat to the boiler
- ↳ Thermostat Network Set-up
- ↳ Home+Control iOS/Android Application
- ↳ Smart Radiator Valves
- ↳ General questions
- ↳ Thermostats Intelligents et Têtes Thermostatiques Intelligentes (FRANCAIS)
- ↳ Thermostat Intelligent
- ↳ Questions générales
- ↳ Raccordement du Thermostat à la chaudière
- ↳ Mise en réseau du Thermostat
- ↳ Les applications iOS/Android/Web du Thermostat
- ↳ Thermostat Modulant Intelligent (OpenTherm)
- ↳ Questions générales
- ↳ Raccordement du Thermostat Modulant à la chaudière
- ↳ Mise en réseau du Thermostat Modulant
- ↳ L'application Home+Control iOS/Android du Thermostat Modulant
- ↳ Têtes Thermostatiques Intelligentes
- ↳ Questions générales
- Air Care
- ↳ Smart Indoor Air Quality Monitor (ENGLISH)
- ↳ Frequently Asked Questions
- ↳ Capteur de Qualité de l'Air Intérieur Intelligent (FRANCAIS)
- ↳ Questions Fréquentes
- Automation and more...
- ↳ Automation and external services (ENGLISH)
- ↳ "With Netatmo" products
- ↳ Voice assistants
- ↳ IFTTT
- ↳ Home automation
- ↳ Domotique et services externes (FRANCAIS)
- ↳ Produits "with Netatmo"
- ↳ Assistants vocaux
- ↳ IFTTT
- ↳ Domotique
- Netatmo Developers Forums
- ↳ Netatmo API
- ↳ Translations & Localization