No detections with V92 unless bell pressed!

Tips, tricks and frequently asked questions
Post Reply
bazzer
Posts: 22
Joined: 15 Dec 2020, 20:04

No detections with V92 unless bell pressed!

Post by bazzer »

My doorbell was working reasonably well with V91, subject to the 3 second delay that Netatmo have on detections being flagged and recorded. However with V92 now nothing happens no detections are triggered unless the bell button is pressed.When are Netatmo going to get this right. They need to scrap their current firmware and replace it as the doorbell is all but useless now.
bazzer
Posts: 22
Joined: 15 Dec 2020, 20:04

Re: No detections with V92 unless bell pressed!

Post by bazzer »

Working again following a long reboot, but detections still worse than v91 software
Hemmik
Posts: 62
Joined: 28 Sep 2020, 21:37

Re: No detections with V92 unless bell pressed!

Post by Hemmik »

Same here. No more detections when the bell is not pressed. I know I can fix this by taking the doorbell off power for a minute or two but this means dismounting it again for me. Please Netatmo, add a reboot button to the app. This will make it so much easier to live with these bugs..
Post Reply

Return to “General questions”