Compatibility Netatmo Thermostat with Luna 3 Comfort 240 Fi

You need some help attaching the thermostat to your specific boiler. This way please !
sbovideo
Posts: 11
Joined: 18 Jan 2015, 16:01

Re: Compatibility Netatmo Thermostat with Luna 3 Comfort 240

Post by sbovideo » 21 Jan 2015, 18:54

hi campusone, i don'jnow. it's not my case beacause i've replaced my old Baxi thermostat with netatmo thermostat. Thus (i think) i've lost the control of hot water guaranteed by odl thermostat. There is a user in italy who used the auxiliary connections of aother boiler (beretta).As you said he connected Relay directly to boiler and he used the thermostat in wireless mode. I don't know if it's possible with Luna 3.
http://www.amazon.it/product-reviews/B00GWKW8SY (sorry but it's in italian)
Last edited by sbovideo on 22 Jan 2015, 14:42, edited 2 times in total.

campusone
Posts: 2
Joined: 21 Jan 2015, 08:50

Re: Compatibility Netatmo Thermostat with Luna 3 Comfort 240

Post by campusone » 22 Jan 2015, 08:35

Hi sbovideo i am also in Italy and do not want to lose control of the hot water. I want to keep the old thermostat for the water and the Netatmo for heating. We need to understand how and where to connect the thermostat relay Netatmo directly on the boiler. Thank

sbovideo
Posts: 11
Joined: 18 Jan 2015, 16:01

Re: Compatibility Netatmo Thermostat with Luna 3 Comfort 240

Post by sbovideo » 22 Jan 2015, 15:25

hi campusone, the technical document (http://www.baxi.it/docs/710915503_Luna3 ... t_-_IT.pdf) it's not clear (page 31). I'm sorry but i don't know how to connect it directly to boiler as you desire.

sbovideo
Posts: 11
Joined: 18 Jan 2015, 16:01

Re: Compatibility Netatmo Thermostat with Luna 3 Comfort 240

Post by sbovideo » 26 Jan 2015, 14:28

Final answer by netatmo support:
<<Hello,
There may be a remote control of your boiler other than the Thermostat. I would advise you to go to the settings of the boiler to see if there is a mechanism that blocks the Thermostat's action.
Thank you in advance.
>>
I gave back netatmo thermostat. It had been so hard to communicate with their support.
Thank you George, you have been so kind and helpful.

GEORGzer
Posts: 801
Joined: 14 Jan 2014, 18:14

Re: Compatibility Netatmo Thermostat with Luna 3 Comfort 240

Post by GEORGzer » 27 Jan 2015, 11:39

You're welcome, but I don't quite get it.

Your old thermostat had only 2 wires. Connecting those two wires (closing the circuit) resulted into the boiler switching on.
The Netatmo thermostats only job is to "close the circuit".

So if connecting the wires really switched the boiler on, but the Netatmo thermostat didn't, it must have been defective.
I'd get a new one and try again.
Home:
Weather Station (Rain Gauge, Wind Gauge, 3 additional Indoor Modules)
2 Valves + Relais (Starter Pack), 5 additional Valves

Office:
Thermostat + Relais (1. Generation)
Healthy Home Coach

sbovideo
Posts: 11
Joined: 18 Jan 2015, 16:01

Re: Compatibility Netatmo Thermostat with Luna 3 Comfort 240

Post by sbovideo » 27 Jan 2015, 11:44

Thank you George, i've replaced fist netatmo with a new Netatmo by it still not working, I will try to connect 2 wires

albelac
Posts: 18
Joined: 13 Feb 2015, 11:14

Re: Compatibility Netatmo Thermostat with Luna 3 Comfort 240

Post by albelac » 13 Feb 2015, 11:28

Hello I understood you're Italian, aren't you? I have a baxi luna comfort 3 HT and I've read on Amazon that apparently Baxi has a proprietary bus attached to the termostat by which the Netatmo does not work. It does not seem to be the case with you. I attach the thermostat picture to be sure. Indeed I have some questions: 1. is Netatmo working properly with you (I've understood so) 2. how do you make sure in summer that the supply of hot water is guaranteed even is the heating is switched off? 3. how can you check that the boiler is sitched on and / or off? 4. was it simple to replace the old thermostat with the new one? thanks indeed for your support
Attachments
baxi-luna-3-comfort-310fi-238736.jpg
baxi-luna-3-comfort-310fi-238736.jpg (216.18 KiB) Viewed 1158 times

sbovideo
Posts: 11
Joined: 18 Jan 2015, 16:01

Re: Compatibility Netatmo Thermostat with Luna 3 Comfort 240

Post by sbovideo » 13 Feb 2015, 20:07

Hi albelac, i gave back netatmo thermostat on amazon because if you simply replace baxi thermostat (your picture) it doesn't work (baxi have a proprietary bus). Your Second question: when i connected netatmo thermostat replascing my old baxi thermostat the hot water worked (i.e. in my shower ) . Your third question: i checked it beacause boiler is near to the thermostat (5 meters) i can ear flame noise. Question 4: it's very simple to replace but i doesn't work with my baxi luna 3.The only way to get netatmo to work is to connect the netamo relay directly to secondary clip of boiler (but i didn't try it). Then you could lost the control of water temperature, i don't know if you can connect netatmo relay (to manage environmental temperature) and old baxi thermostat (to only manage hot water for shower (i.e))

mauro_silva
Posts: 1
Joined: 06 Jul 2019, 11:26

Re: Compatibility Netatmo Thermostat with Luna 3 Comfort 240 Fi

Post by mauro_silva » 06 Jul 2019, 11:29

Hi sbovideo. Do you have resolved the problem?

sbovideo
Posts: 11
Joined: 18 Jan 2015, 16:01

Re: Compatibility Netatmo Thermostat with Luna 3 Comfort 240 Fi

Post by sbovideo » 06 Jul 2019, 20:58

i'm sorry but i quitted some years ago. There is a suggestion of Maurizio Natali on https://www.saggiamente.com/2016/03/rec ... e-netatmo/
but i did not follow it.

Post Reply

Return to “Attaching the Thermostat to the boiler”