Thermostat netatmo and boiler Baxi Nuvola 3
-
- Posts: 1
- Joined: 22 Nov 2020, 13:10
Thermostat netatmo and boiler Baxi Nuvola 3
Hi. I connect thermostat neratmo intead of old thermostat auraton according the picture. And the thermostat unit is not statring the boiler. Even if i try tu push the button on the unit it not start the boiler. Is it necessery to change the setting on boiler somehow? Thaks
- Attachments
-
- Screenshot_20201122-130821_Gallery.jpg (1.8 MiB) Viewed 481 times
Re: Thermostat netatmo and boiler Baxi Nuvola 3
Wiring seems correct.
Try replacing the black/grey wires with a bridge-wire and see if your boiler turns on. If not, issue is with the boiler's settings.
If it does turn on, check all the connections with the Netatmo Relais again.
There is always the possibility of a defective Relais, in which case you'll have to contact Netatmo support directly through the helpcenter.
Try replacing the black/grey wires with a bridge-wire and see if your boiler turns on. If not, issue is with the boiler's settings.
If it does turn on, check all the connections with the Netatmo Relais again.
There is always the possibility of a defective Relais, in which case you'll have to contact Netatmo support directly through the helpcenter.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee