Bosch Condens GC2300iW

You need some help attaching the thermostat to your specific boiler. This way please !
Post Reply
BuboD22
Posts: 1
Joined: 13 Jan 2021, 13:48

Bosch Condens GC2300iW

Post by BuboD22 »

Hi can anyone advise me how to connect a Bosch Condens GC2300iW? :(
Untitled-1.jpg
Untitled-1.jpg (450.32 KiB) Viewed 794 times
Last edited by GEORGzer on 13 Jan 2021, 17:07, edited 1 time in total.
Reason: Topic split
GEORGzer
Posts: 2663
Joined: 14 Jan 2014, 18:14

Re: Bosch Condens GC2300iW

Post by GEORGzer »

Hi, I created a new topic for your question ;)
Screenshot 2021-01-13 at 17.10.56.png
Screenshot 2021-01-13 at 17.10.56.png (226.66 KiB) Viewed 788 times
You have to connect the Netatmo Relais' black and grey wires to this terminal and remove the existing bridge (if installed).
You also have to connect the Relais' brown and blue wires to a power source.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors

Not a Netatmo employee
np10
Posts: 4
Joined: 04 Dec 2021, 15:00

Re: Bosch Condens GC2300iW

Post by np10 »

GEORGzer wrote: 13 Jan 2021, 17:12 Hi, I created a new topic for your question ;)

Screenshot 2021-01-13 at 17.10.56.png

You have to connect the Netatmo Relais' black and grey wires to this terminal and remove the existing bridge (if installed).
You also have to connect the Relais' brown and blue wires to a power source.
Hi GEORGzer, the power source can be a external power source? thanks. ;)
GEORGzer
Posts: 2663
Joined: 14 Jan 2014, 18:14

Re: Bosch Condens GC2300iW

Post by GEORGzer »

Yes, you can mount a standard power-plug to the end of the cable.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors

Not a Netatmo employee
Post Reply

Return to “Attaching the Thermostat to the boiler”