netamo and glow worm ultimate 3

You need some help attaching the thermostat to your specific boiler. This way please !
Post Reply
moggy4
Posts: 3
Joined: 08 Mar 2021, 13:09

netamo and glow worm ultimate 3

Post by moggy4 »

Hi newbie here

I was hoping someone may be able to help me.
i have a glow worm ultimate 3 boiler and would like to install a netatmo thermostat .
has anybody done this with this boiler???
is it compatible with netatmo thermostat ??

there are several connections on the boiler
i believe i should connect netatmo to the rt 24 volt

1x ebus/
1 x rt 24 volt
1x b/off

Image

any help much appreciated
nethome
Posts: 34
Joined: 10 Mar 2021, 22:14

Re: netamo and glow worm ultimate 3

Post by nethome »

It's easy to check if you remove the jumper from the RT then the boiler should turn off.
Nothing can be connected there that gives voltage.
rt.jpg
rt.jpg (41.52 KiB) Viewed 799 times
Attachments
rt2.jpg
rt2.jpg (33.63 KiB) Viewed 799 times
moggy4
Posts: 3
Joined: 08 Mar 2021, 13:09

Re: netamo and glow worm ultimate 3

Post by moggy4 »

Thank you very much nethome.
the netatmo thermostats black and grey wires do not give voltage does it ??
nethome
Posts: 34
Joined: 10 Mar 2021, 22:14

Re: netamo and glow worm ultimate 3

Post by nethome »

Yes
GEORGzer
Posts: 2663
Joined: 14 Jan 2014, 18:14

Re: netamo and glow worm ultimate 3

Post by GEORGzer »

topic moved

Black/grey to the RT terminals (remove bridge wire) and brown/blue to the boiler‘s power supply.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors

Not a Netatmo employee
moggy4
Posts: 3
Joined: 08 Mar 2021, 13:09

Re: netamo and glow worm ultimate 3

Post by moggy4 »

Many thanks for all your help
Post Reply

Return to “Attaching the Thermostat to the boiler”