Hi newbie here
I was hoping someone may be able to help me.
i have a glow worm ultimate 3 boiler and would like to install a netatmo thermostat .
has anybody done this with this boiler???
is it compatible with netatmo thermostat ??
there are several connections on the boiler
i believe i should connect netatmo to the rt 24 volt
1x ebus/
1 x rt 24 volt
1x b/off
any help much appreciated
netamo and glow worm ultimate 3
Re: netamo and glow worm ultimate 3
It's easy to check if you remove the jumper from the RT then the boiler should turn off.
Nothing can be connected there that gives voltage.
Nothing can be connected there that gives voltage.
- Attachments
-
- rt2.jpg (33.63 KiB) Viewed 806 times
Re: netamo and glow worm ultimate 3
Thank you very much nethome.
the netatmo thermostats black and grey wires do not give voltage does it ??
the netatmo thermostats black and grey wires do not give voltage does it ??
Re: netamo and glow worm ultimate 3
topic moved
Black/grey to the RT terminals (remove bridge wire) and brown/blue to the boiler‘s power supply.
Black/grey to the RT terminals (remove bridge wire) and brown/blue to the boiler‘s power supply.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Re: netamo and glow worm ultimate 3
Many thanks for all your help