Finding the right cables

You need some help attaching the thermostat to your specific boiler. This way please !
Post Reply
Luke
Posts: 1
Joined: 14 Mar 2021, 14:58

Finding the right cables

Post by Luke »

Hello guys,

I‘m an newbie to this kind of stuff and tried my best, without much success.

I was able to get the Relais running, and it’s connected with the Thermostat. But, the Relais is still unable to control the boiler. Obviously I connected some of the cables the wrong way.
On the pictures you can see the available cables and my first try to connect them.

Any help is very much appreciated. Thanks!

Luke
Attachments
5FC2E687-1A7A-4AD0-A188-E1C766A50319.jpeg
5FC2E687-1A7A-4AD0-A188-E1C766A50319.jpeg (2.07 MiB) Viewed 650 times
0A89BFD8-A2B2-4B4E-8E1B-E3CC9CFEB547.jpeg
0A89BFD8-A2B2-4B4E-8E1B-E3CC9CFEB547.jpeg (2.06 MiB) Viewed 650 times
GEORGzer
Posts: 2663
Joined: 14 Jan 2014, 18:14

Re: Finding the right cables

Post by GEORGzer »

Connect the Herz actuator’s blue wire to the N wires as well.
Connect the Relais‘ grey wire to the actuator’s brown wire and the Relais‘ black wire to the L wires.

Black and Grey wires only connect to each other internally, they never provide any power at any time.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors

Not a Netatmo employee
Post Reply

Return to “Attaching the Thermostat to the boiler”