nefit proline hrc24 does not react to thermostat

You need some help attaching the thermostat to your specific boiler. This way please !
Post Reply
remcat2
Posts: 8
Joined: 15 Jul 2014, 22:38

nefit proline hrc24 does not react to thermostat

Post by remcat2 » 16 Feb 2015, 18:02

i installed relay and thermostat by wire as instructed. Everything functions perfect. But boiler does not switch on when instructed by thermostat.
Please help me in getting this working.

I attached a photo with the connection of the wires to the boiler. The orange signal wire is connected to the orange connector, the blue one to the red connector.

Please help me in getting this working. Thank you.

Remco Ates
Attachments
IMG_0411.jpg
connection of signal wires to the boiler
IMG_0411.jpg (19.55 KiB) Viewed 197 times

remcat2
Posts: 8
Joined: 15 Jul 2014, 22:38

Re: nefit proline hrc24 does not react to thermostat

Post by remcat2 » 18 Feb 2015, 08:46

fixed the problem! The netatmo thermostat is a on/of thermostat. That has to be connected to the green connector.
My previous theromostat was of the modulating type. That is why the signal wires were connected to the orange connector
Changed the wiring this morning and the boiler kicked in.

Post Reply

Return to “Attaching the Thermostat to the boiler”