Junkers Cerapur + FW100 Remote - Temperature too warm
-
- Posts: 11
- Joined: 13 Nov 2015, 13:41
Junkers Cerapur + FW100 Remote - Temperature too warm
I just added the Netatmao Thermostat three weeks ago . My system junkers cerapur witch the FW100 remote , aleady working . I am not able to reduce the temerature under 23 degrees . I tried all programs , reduced the temperature on the boiler , nothing helps . Do i have to connect the junkers remote again and reset all Programs on default ? Any other suggestions on working configuartions ?
Last edited by GEORGzer on 10 Jan 2021, 10:50, edited 2 times in total.
Reason: title adapted
Reason: title adapted
-
- Posts: 3088
- Joined: 02 Jan 2014, 11:20
Re: Temperature too warm
Hello,
Please explain the exact wirings which have been done, and don't hesitate to share pictures!
Please explain the exact wirings which have been done, and don't hesitate to share pictures!
Brieuc - Netatmo Team
-
- Posts: 11
- Joined: 13 Nov 2015, 13:41
Re: Temperature too warm
At first i fixed The wires as they were at my working system . I was very happy . Everything seemed to work properly . After a short time the heating rose up very high . Even the changing of the polarity was not efficient .
-
- Posts: 3088
- Joined: 02 Jan 2014, 11:20
Re: Temperature too warm
OK, but the FW100 doesn't work like our Thermostat, the connections of the control wires have to be changed on the boiler. Did you do that change?
Please send us a picture of the wiring terminal, we'll tell you which ports have to be used.
Please send us a picture of the wiring terminal, we'll tell you which ports have to be used.
Brieuc - Netatmo Team
-
- Posts: 11
- Joined: 13 Nov 2015, 13:41
Re: Temperature too warm
I didn`t change any wires . I send you a photo from the connections at the boiler , is that correct ?
-
- Posts: 11
- Joined: 13 Nov 2015, 13:41
Re: Temperature too warm
Are you available on Saturday ?
-
- Posts: 3088
- Joined: 02 Jan 2014, 11:20
Re: Temperature too warm
OK, and on which ports of the boiler these two control wires are connected?
Brieuc - Netatmo Team
-
- Posts: 3088
- Joined: 02 Jan 2014, 11:20
Re: Temperature too warm
Sometimes I check the forum on the week-end, but I think it will be hard for me this week-end (family meeting...).
Brieuc - Netatmo Team
-
- Posts: 11
- Joined: 13 Nov 2015, 13:41
Re: Temperature too warm
These are the first three pictures
- Attachments
-
- IMG_5321.JPG (42.18 KiB) Viewed 1666 times
-
- IMG_5319.JPG (39.01 KiB) Viewed 1666 times
-
- IMG_5318.JPG (39.3 KiB) Viewed 1666 times