25° bracket
-
- Posts: 7
- Joined: 21 May 2021, 23:11
25° bracket
The Smart Doorbell comes with a 25° bracket. In my situation I need a bracket with a higher angle. Other suppliers offer brackets with multiple different degrees angle like 25, 50, 75. I would like the option to procure brackets with different (higher) angles.
Re: 25° bracket
I know that you mean Netatmo to make it available. However, since that can take a while, I’m using this one:
https://cults3d.com/en/3d-model/home/ne ... right-side
If you have got a3D printer or a friend with one, perhaps you can give it a try.
Regards,
Daniel
https://cults3d.com/en/3d-model/home/ne ... right-side
If you have got a3D printer or a friend with one, perhaps you can give it a try.
Regards,
Daniel
-
- Posts: 7
- Joined: 21 May 2021, 23:11
Re: 25° bracket
Thanks! I had it printed and installed it with some minor adjustments successfully. It has not solved my problem of having a better detection of folks entering the footpath to my door, though. The trigger to start recording is still lagging to such an extent that the video's start when folks are already walking back. Lots of useless video's as a result.dvidal8 wrote: ↑22 May 2021, 09:22 I know that you mean Netatmo to make it available. However, since that can take a while, I’m using this one:
https://cults3d.com/en/3d-model/home/ne ... right-side
If you have got a3D printer or a friend with one, perhaps you can give it a try.
Regards,
Daniel
-
- Posts: 12
- Joined: 22 Sep 2021, 09:16
Re: 25° bracket
I’d also like the option for different angles.