Hi Hemmink,
This is indeed strange. My doorbell is connecting to my (dutch) Fritzbox 7590 router without any problems on 2.4Ghz with WPA2. Do you have the new WPA3 option enabled in the Fritzbox? Not sure if this is a problem but worth a try and easy to disable, I only have the WPA2 CCMP option active in WIFI security.
Wiring Smart Doorbell
Re: Wiring Smart Doorbell
Thanks for the suggestion. I did have WPA3 enabled a few months ago but disabled it to add a few other cameras. I will check if it's enabled again.rheuft wrote: ↑30 Sep 2020, 16:27 Hi Hemmink,
This is indeed strange. My doorbell is connecting to my (dutch) Fritzbox 7590 router without any problems on 2.4Ghz with WPA2. Do you have the new WPA3 option enabled in the Fritzbox? Not sure if this is a problem but worth a try and easy to disable, I only have the WPA2 CCMP option active in WIFI security.
Re: Wiring Smart Doorbell
And I see in my router that I also fixed the 2.4Ghz on channel 11, no autochannel. Also worth a try.
-
- Posts: 594
- Joined: 15 Jan 2020, 10:48
Re: Wiring Smart Doorbell
Hemmik, your doorbell isn't linked to your account and doesn't have a network configuration. When the doorbell LED is glowing white, it means that it is in configuration mode, ready to be installed in the Security app.
Cutting off the power for 2 minutes should make it enter the configuration mode again, can you confirm when you see the LED glowing white?
Cutting off the power for 2 minutes should make it enter the configuration mode again, can you confirm when you see the LED glowing white?
Arthur - Product Manager
Re: Wiring Smart Doorbell
Arthur_Netatmo, kan you please help me out. I'm getting more and more frustrated here. I really think there is something wrong with my doorbell. Measured the currency and that is all OK. After a factory reset I can get it working as long as its connected to USB but as soon as I put it outside it goes to glowing green light.
Right now I was going to do a factory reset again but now it has a glowing white light.
I also put some photo's of my situation.
Right now I was going to do a factory reset again but now it has a glowing white light.
I also put some photo's of my situation.
- Attachments
-
- IMG_3793.jpg (3.49 MiB) Viewed 3824 times
-
- IMG_3792.jpg (3.22 MiB) Viewed 3824 times
Re: Wiring Smart Doorbell
Hi Arthur. I’ve tried this but to no avail. It’s glowing white and i can see the network in my network list (I don’t select it but it confirms that it’s in config mode). I’ve also tested different security settings on my access point and tried with my iPad. I’ve even tries adding it to my iPhone hotspot. Nothing helps.Arthur_Netatmo wrote: ↑30 Sep 2020, 17:17 Hemmik, your doorbell isn't linked to your account and doesn't have a network configuration. When the doorbell LED is glowing white, it means that it is in configuration mode, ready to be installed in the Security app.
Cutting off the power for 2 minutes should make it enter the configuration mode again, can you confirm when you see the LED glowing white?
-
- Posts: 594
- Joined: 15 Jan 2020, 10:48
Re: Wiring Smart Doorbell
Thank you for the pictures Stefman, I confirm your electrical setup is correct.
Please unplug the doorbell from USB and plug it on the wall mount.
It is perfectly normal to see the LED glowing green for a few moments. The doorbell will begin its electrical installation, by testing the circuit. It can take up to 1 minute.
When the doorbell finishes its electrical installation, you will hear a melody coming from the doorbell, and the LED will be solid green, at this moment you will be able to press the button to make your chime ring
Please unplug the doorbell from USB and plug it on the wall mount.
It is perfectly normal to see the LED glowing green for a few moments. The doorbell will begin its electrical installation, by testing the circuit. It can take up to 1 minute.
When the doorbell finishes its electrical installation, you will hear a melody coming from the doorbell, and the LED will be solid green, at this moment you will be able to press the button to make your chime ring
Arthur - Product Manager
-
- Posts: 594
- Joined: 15 Jan 2020, 10:48
Re: Wiring Smart Doorbell
Do you have an error when trying to install your doorbell in your app?Hemmik wrote: ↑30 Sep 2020, 17:34
Hi Arthur. I’ve tried this but to no avail. It’s glowing white and i can see the network in my network list (I don’t select it but it confirms that it’s in config mode). I’ve also tested different security settings on my access point and tried with my iPad. I’ve even tries adding it to my iPhone hotspot. Nothing helps.
Are you using the Security app, or the Home app ?
Arthur - Product Manager
Re: Wiring Smart Doorbell
You don't know how many times I have tried that, it keeps glowing green and sometimes it becomes red for one time.Arthur_Netatmo wrote: ↑30 Sep 2020, 17:37 Thank you for the pictures Stefman, I confirm your electrical setup is correct.
Please unplug the doorbell from USB and plug it on the wall mount.
It is perfectly normal to see the LED glowing green for a few moments. The doorbell will begin its electrical installation, by testing the circuit. It can take up to 1 minute.
When the doorbell finishes its electrical installation, you will hear a melody coming from the doorbell, and the LED will be solid green, at this moment you will be able to press the button to make your chime ring
Is there some other way I can contact support maybe with videochat?
Re: Wiring Smart Doorbell
Translation: adding accessory not possible, accessory not reachable. I used the security appArthur_Netatmo wrote: ↑30 Sep 2020, 17:39Do you have an error when trying to install your doorbell in your app?Hemmik wrote: ↑30 Sep 2020, 17:34
Hi Arthur. I’ve tried this but to no avail. It’s glowing white and i can see the network in my network list (I don’t select it but it confirms that it’s in config mode). I’ve also tested different security settings on my access point and tried with my iPad. I’ve even tries adding it to my iPhone hotspot. Nothing helps.
Are you using the Security app, or the Home app ?