On the beta forum some had the same issue and did an upgrade to a 2A power source.
Depending on the quality and length off your wiring there could be to much lost.
8V/ 1A works fine for me but i only have about 1,5 meter of wiring between the power source and doorbell.
[Solved] Connecting wireless Honeywell DC915SCV.
Re: [Solved] Connecting wireless Honeywell DC915SCV.
1x Presence outdoor camera siren V3.18.0
2x Thermostat V76 + 10x Valves V100 + relais 236
1x weather station v202, outdoor module V53 and additional indoor module V53
2x Thermostat V76 + 10x Valves V100 + relais 236
1x weather station v202, outdoor module V53 and additional indoor module V53
Re: [Solved] Connecting wireless Honeywell DC915SCV.
You may be right with this and my wiring is indeed quite long and old (monofilament wire). I bought this power source https://www.amazon.fr/gp/product/B07J2N ... UTF8&psc=1 which is cheap and probably not giving enough power. I'll try with a more powerful power source, maybe this one https://ecataleg.be/fr/product/413092, but I hope I will not buy it and then observe that the problem is still there. Finger crossed... Anyway, thank you very much for your help and your quick answers!
Edit: where is this beta forum you're mentioning?
Edit: where is this beta forum you're mentioning?
Re: [Solved] Connecting wireless Honeywell DC915SCV.
You can only access the beta forum if you are a beta doorbell user
1x Presence outdoor camera siren V3.18.0
2x Thermostat V76 + 10x Valves V100 + relais 236
1x weather station v202, outdoor module V53 and additional indoor module V53
2x Thermostat V76 + 10x Valves V100 + relais 236
1x weather station v202, outdoor module V53 and additional indoor module V53
Re: [Solved] Connecting wireless Honeywell DC915SCV.
Well, I received this power source https://ecataleg.be/fr/product/413092 and, after testing it, the problem is still the same. :'( With such a power source, I can't believe that the problem is really coming from the power source... It should be somewhere else but I don't know where... My wiring is the same as the first picture of this post, the chime module is on 2-LOW according to the user manual and the purple blinking led I saw, I reseted the doorbell several times, followed the instructions on the Netatmo help center, ... What can I do more before returning the doorbell? :'( Merry Xmas to all and thanks for your help.
Re: [Solved] Connecting wireless Honeywell DC915SCV.
I got it working, finally !!! With the 12V 2A output (instead of 8V 3A) of my new power source it's working!
Well... With such a problem I think that the user manual/the Netatmo help center should really indicate that 8V is not an option...
Merry Xmas!
Well... With such a problem I think that the user manual/the Netatmo help center should really indicate that 8V is not an option...
Merry Xmas!
Re: [Solved] Connecting wireless Honeywell DC915SCV.
Hi,
I want to use the Honeywell DW915S with the Netatmo Doorbell, prefered the Honeywell bell should to be powered as well, rather than battery powered.
Another radio gong should also be installed on the upper floor, as well as a button at the garden.
Two door-opener buttons are also in my house.
I tried to understand the explanations and draw some diagram.
Is it right and should work like this? Or do I need to use the DW915S with batteries?
Thanks
I want to use the Honeywell DW915S with the Netatmo Doorbell, prefered the Honeywell bell should to be powered as well, rather than battery powered.
Another radio gong should also be installed on the upper floor, as well as a button at the garden.
Two door-opener buttons are also in my house.
I tried to understand the explanations and draw some diagram.
Is it right and should work like this? Or do I need to use the DW915S with batteries?
Thanks
Re: [Solved] Connecting wireless Honeywell DC915SCV.
I have some problems with my DC915S.
After I use the plan from Honeywell it rings
Now my problem is the doorbell is green. (The old analoge chimes no problems)
I don’t find out why?!
I reset the doorbell with usb power I can HomeKit all fine.
Back to the wall the led is green.
The fuse on doorbell and the module I have change.
I use a transformer with 12v and 15Va
Did anyone has the same problem?
After I use the plan from Honeywell it rings
Now my problem is the doorbell is green. (The old analoge chimes no problems)
I don’t find out why?!
I reset the doorbell with usb power I can HomeKit all fine.
Back to the wall the led is green.
The fuse on doorbell and the module I have change.
I use a transformer with 12v and 15Va
Did anyone has the same problem?
Re: [Solved] Connecting wireless Honeywell DC915SCV.
Hi everyone, can anyone who got this working send a pic of your wiring?
And - do you still hvae the battery in the honeywell wireless converter?
Struggling a bit - got the Netatmo part working, but the honeywell chime then sounds continuously, and won't stop!
I'd be forever grateful if you can help.
And - do you still hvae the battery in the honeywell wireless converter?
Struggling a bit - got the Netatmo part working, but the honeywell chime then sounds continuously, and won't stop!
I'd be forever grateful if you can help.
Re: [Solved] Connecting wireless Honeywell DC915SCV.
Hi I use this Plan.
With this my Chimes works.
If it not work check the fuse at the Module.
With this my Chimes works.
If it not work check the fuse at the Module.
- Attachments
-
- 491012C5-A286-4CE6-9D90-C565D58FAB3F.jpeg (424.67 KiB) Viewed 1909 times
-
- 56952AF3-1ED0-4078-913E-9DA7FA700DBC.png (137.7 KiB) Viewed 1909 times