[Solved] Connecting wireless Honeywell DC915SCV.

Mark@BC
Posts: 279
Joined: 15 Nov 2019, 21:32

Re: [Solved] Connecting wireless Honeywell DC915SCV.

Post by Mark@BC »

On the beta forum some had the same issue and did an upgrade to a 2A power source.

Depending on the quality and length off your wiring there could be to much lost.

8V/ 1A works fine for me but i only have about 1,5 meter of wiring between the power source and doorbell.
1x Presence outdoor camera siren V3.18.0
2x Thermostat V76 + 10x Valves V100 + relais 236
1x weather station v202, outdoor module V53 and additional indoor module V53
pcmp
Posts: 8
Joined: 19 Dec 2020, 11:55

Re: [Solved] Connecting wireless Honeywell DC915SCV.

Post by pcmp »

You may be right with this and my wiring is indeed quite long and old (monofilament wire). I bought this power source https://www.amazon.fr/gp/product/B07J2N ... UTF8&psc=1 which is cheap and probably not giving enough power. I'll try with a more powerful power source, maybe this one https://ecataleg.be/fr/product/413092, but I hope I will not buy it and then observe that the problem is still there. Finger crossed... Anyway, thank you very much for your help and your quick answers!
Edit: where is this beta forum you're mentioning?
Mark@BC
Posts: 279
Joined: 15 Nov 2019, 21:32

Re: [Solved] Connecting wireless Honeywell DC915SCV.

Post by Mark@BC »

You can only access the beta forum if you are a beta doorbell user 😉
1x Presence outdoor camera siren V3.18.0
2x Thermostat V76 + 10x Valves V100 + relais 236
1x weather station v202, outdoor module V53 and additional indoor module V53
pcmp
Posts: 8
Joined: 19 Dec 2020, 11:55

Re: [Solved] Connecting wireless Honeywell DC915SCV.

Post by pcmp »

Well, I received this power source https://ecataleg.be/fr/product/413092 and, after testing it, the problem is still the same. :'( With such a power source, I can't believe that the problem is really coming from the power source... It should be somewhere else but I don't know where... My wiring is the same as the first picture of this post, the chime module is on 2-LOW according to the user manual and the purple blinking led I saw, I reseted the doorbell several times, followed the instructions on the Netatmo help center, ... What can I do more before returning the doorbell? :'( Merry Xmas to all and thanks for your help.
pcmp
Posts: 8
Joined: 19 Dec 2020, 11:55

Re: [Solved] Connecting wireless Honeywell DC915SCV.

Post by pcmp »

I got it working, finally !!! With the 12V 2A output (instead of 8V 3A) of my new power source it's working! :D

Well... With such a problem I think that the user manual/the Netatmo help center should really indicate that 8V is not an option...

Merry Xmas!
Crossfire
Posts: 1
Joined: 04 Jan 2021, 16:03

Re: [Solved] Connecting wireless Honeywell DC915SCV.

Post by Crossfire »

Hi,

I want to use the Honeywell DW915S with the Netatmo Doorbell, prefered the Honeywell bell should to be powered as well, rather than battery powered.
Another radio gong should also be installed on the upper floor, as well as a button at the garden.
Two door-opener buttons are also in my house.

I tried to understand the explanations and draw some diagram.
Is it right and should work like this? Or do I need to use the DW915S with batteries?

Thanks
Netatmo Kamera.jpg
Netatmo Kamera.jpg (91.53 KiB) Viewed 2231 times
DaveV
Posts: 18
Joined: 08 Oct 2020, 09:09

Re: [Solved] Connecting wireless Honeywell DC915SCV.

Post by DaveV »

.........
dedj
Posts: 2
Joined: 16 Jan 2021, 15:57

Re: [Solved] Connecting wireless Honeywell DC915SCV.

Post by dedj »

I have some problems with my DC915S.
After I use the plan from Honeywell it rings :)
Now my problem is the doorbell is green. (The old analoge chimes no problems)
I don’t find out why?!

I reset the doorbell with usb power I can HomeKit all fine.
Back to the wall the led is green.

The fuse on doorbell and the module I have change.
I use a transformer with 12v and 15Va

Did anyone has the same problem?
cjcjcj
Posts: 1
Joined: 10 Jul 2021, 11:58

Re: [Solved] Connecting wireless Honeywell DC915SCV.

Post by cjcjcj »

Hi everyone, can anyone who got this working send a pic of your wiring?
And - do you still hvae the battery in the honeywell wireless converter?

Struggling a bit - got the Netatmo part working, but the honeywell chime then sounds continuously, and won't stop!

I'd be forever grateful if you can help.
dedj
Posts: 2
Joined: 16 Jan 2021, 15:57

Re: [Solved] Connecting wireless Honeywell DC915SCV.

Post by dedj »

Hi I use this Plan.
With this my Chimes works.
If it not work check the fuse at the Module.
Attachments
491012C5-A286-4CE6-9D90-C565D58FAB3F.jpeg
491012C5-A286-4CE6-9D90-C565D58FAB3F.jpeg (424.67 KiB) Viewed 1875 times
56952AF3-1ED0-4078-913E-9DA7FA700DBC.png
56952AF3-1ED0-4078-913E-9DA7FA700DBC.png (137.7 KiB) Viewed 1875 times
Post Reply

Return to “Electrical Wiring”