Hello everybody.
can you tell me the netatmo doorbell is compatible with my system? if not, what is the best and easiest way to upgrade?
Thanks and regards Michael
Netatmo Doorbell with Swiss Koch TC:Bus System
Netatmo Doorbell with Swiss Koch TC:Bus System
- Attachments
-
- my installation marked in yellow
- D66BF223-5F70-4227-A4C9-556C6B38423D.jpeg (440.24 KiB) Viewed 484 times
Re: Netatmo Doorbell with Swiss Koch TC:Bus System
It’s officially not possible.
You can either retire the intercom system and only use the wires (if it‘s a single house and no apartment), like this user did:
https://forum.netatmo.com/viewtopic.php?f=197&t=18890
Or you can hook it up to the intercom using a relay, that replaces the pushbutton, like I did:
https://forum.netatmo.com/viewtopic.php?f=197&t=18899
But it should be noted that I only replaced one push-button next to my apartment door and not the intercom-panel downstairs at the main entry.
You can either retire the intercom system and only use the wires (if it‘s a single house and no apartment), like this user did:
https://forum.netatmo.com/viewtopic.php?f=197&t=18890
Or you can hook it up to the intercom using a relay, that replaces the pushbutton, like I did:
https://forum.netatmo.com/viewtopic.php?f=197&t=18899
But it should be noted that I only replaced one push-button next to my apartment door and not the intercom-panel downstairs at the main entry.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee