Hi guys,
I have a chime with an internal transformer, probably the same that is shown in the help center document (the one with the T-86 transformator).
I re-wired the chime module according to the help center document yesterday and since that it seems my problems I had with the chime (buzzing/vibrating) are gone.
At the moment I am still wondering how to configure the chime module correctly?
As described in setup guide I did set it to 1-LOW. The video doorbell was fine with that. However in that post it is mentioned that 1-LOW is for low-voltage systems, between 10.5VAC and 24VAC. As the T-86 transforms from 230V to 8V/1A should I set the chime module to 2-LOW (for very low-voltage systems, between 8VAC and 10.5VAC), even if the LED in initial setup was not purple? And if yes? When should I set it to 2-LOW?
(a) After video doorbell is initialized
(b) during initializing, before pressing the doorbell button the first time
(c) directly at startup, before initializing?
Thanks for your input and kind regards from Germany,
Markus
Chime with an internal transformer (8V/1A) and chime module settings
Re: Chime with an internal transformer (8V/1A) and chime module settings
Doorbell ran fine for the last two weeks with 1-LOW.
However this night I got the message that the doorbell is in energy saving mode (even if in the same moment I got the message that it is back to normal).
So I am pushing my question: wouldn’t it be better to set it to 2-LOW?
Thanks and regards
Markus
However this night I got the message that the doorbell is in energy saving mode (even if in the same moment I got the message that it is back to normal).
So I am pushing my question: wouldn’t it be better to set it to 2-LOW?
Thanks and regards
Markus
Jump to
- Forum Terms of Use
- NEW FORUM 🥳
- Weather
- ↳ Smart Home Weather Station and its accessories (ENGLISH)
- ↳ General questions
- ↳ Setting up my Weather Station
- ↳ My Weather Station data
- ↳ Weather Station iOS Application
- ↳ Weather Station Android Application
- ↳ Weather Station Web Application
- ↳ Feature requests
- ↳ Station Météo Intelligente et ses accessoires (FRANCAIS)
- ↳ Questions générales
- ↳ Mes données météo
- ↳ Les applications iOS/Android/Web de la Station Météo
- ↳ Requêtes d'amélioration
- Security
- ↳ Security Cameras and accessories (ENGLISH)
- ↳ Smart Indoor Camera (Welcome)
- ↳ General questions
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Feature requests
- ↳ Smart Door and Window Sensors
- ↳ General questions
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Feature requests
- ↳ Smart Indoor Siren
- ↳ General Questions
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Feature requests
- ↳ Smart Smoke Alarm
- ↳ General questions
- ↳ Smart Outdoor Cameras (Presence) with or without Siren
- ↳ General questions
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Feature requests
- ↳ Smart Video Doorbell
- ↳ General questions
- ↳ Applications
- ↳ Feature request
- ↳ Electrical Wiring
- ↳ Caméras et accessoires de Sécurité (FRANCAIS)
- ↳ Caméra Intérieure Intelligente (Welcome)
- ↳ Questions générales
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Suggestions, idées d'améliorations
- ↳ Détecteurs d'Ouverture Intelligents pour Portes et Fenêtres
- ↳ Questions générales
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Suggestions, idées d'améliorations
- ↳ Sirène Intérieure Intelligente
- ↳ Questions générales
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Suggestions, idées d'améliorations
- ↳ Détecteur de Fumée Intelligent
- ↳ Questions générales
- ↳ Caméras Extérieures Intelligentes (Presence) avec ou sans Sirène
- ↳ Questions générales
- ↳ Applications
- ↳ Android
- ↳ iOS
- ↳ Web App (my.netatmo.com)
- ↳ Suggestions, idées d'améliorations
- ↳ Sonnette Vidéo Intelligente
- ↳ Questions générales
- ↳ Applications
- ↳ Suggestions, idées d'améliorations
- ↳ Installation électrique
- Energy
- ↳ Smart Thermostats and Smart Radiator Valves (ENGLISH)
- ↳ Smart Thermostat
- ↳ General questions
- ↳ Attaching the Thermostat to the boiler
- ↳ Thermostat Network Set-up
- ↳ Thermostat iOS/Android/Web Application
- ↳ Smart Modulating Thermostat (OpenTherm)
- ↳ General Questions
- ↳ Attaching the Thermostat to the boiler
- ↳ Thermostat Network Set-up
- ↳ Home+Control iOS/Android Application
- ↳ Smart Radiator Valves
- ↳ General questions
- ↳ Thermostats Intelligents et Têtes Thermostatiques Intelligentes (FRANCAIS)
- ↳ Thermostat Intelligent
- ↳ Questions générales
- ↳ Raccordement du Thermostat à la chaudière
- ↳ Mise en réseau du Thermostat
- ↳ Les applications iOS/Android/Web du Thermostat
- ↳ Thermostat Modulant Intelligent (OpenTherm)
- ↳ Questions générales
- ↳ Raccordement du Thermostat Modulant à la chaudière
- ↳ Mise en réseau du Thermostat Modulant
- ↳ L'application Home+Control iOS/Android du Thermostat Modulant
- ↳ Têtes Thermostatiques Intelligentes
- ↳ Questions générales
- Air Care
- ↳ Smart Indoor Air Quality Monitor (ENGLISH)
- ↳ Frequently Asked Questions
- ↳ Capteur de Qualité de l'Air Intérieur Intelligent (FRANCAIS)
- ↳ Questions Fréquentes
- Automation and more...
- ↳ Automation and external services (ENGLISH)
- ↳ "With Netatmo" products
- ↳ Voice assistants
- ↳ IFTTT
- ↳ Home automation
- ↳ Domotique et services externes (FRANCAIS)
- ↳ Produits "with Netatmo"
- ↳ Assistants vocaux
- ↳ IFTTT
- ↳ Domotique
- Netatmo Developers Forums
- ↳ Netatmo API
- ↳ Translations & Localization