Yesterday I've tried to install the smart doorbell, however I keep on getting a low power message. I have followed the instructions on netatmo help,
but clearly some thing is not adding up
I don't have access to the netatmo zen desk,can anyone confirm what the right setup is with the Byron 776?
Byron 776 insufficient power source
Re: Byron 776 insufficient power source
Hi, take look here: https://helpcenter.netatmo.com/fr/sonne ... e-carillon there are some pictures to help you with the wiring. If it's still not working after having changed the wires, try reseting the doorbell: https://helpcenter.netatmo.com/en-us/sm ... o-doorbell
I have the same problem as you but with another chime, I posted here: https://forum.netatmo.com/viewtopic.php?f=197&t=18900 (edit: I fixed the problem by using a 12V 2A power source)
Merry Xmas!
I have the same problem as you but with another chime, I posted here: https://forum.netatmo.com/viewtopic.php?f=197&t=18900 (edit: I fixed the problem by using a 12V 2A power source)
Merry Xmas!
Re: Byron 776 insufficient power source
Merry Xmas!pcmp wrote: ↑24 Dec 2020, 13:09 Hi, take look here: https://helpcenter.netatmo.com/fr/sonne ... e-carillon there are some pictures to help you with the wiring. If it's still not working after having changed the wires, try reseting the doorbell: https://helpcenter.netatmo.com/en-us/sm ... o-doorbell
I have the same problem as you but with another chime, I posted here: https://forum.netatmo.com/viewtopic.php?f=197&t=18900 (edit: I fixed the problem by using a 12V 2A power source)
Merry Xmas!
Thanks let me try and see if I can get the Byron 776 working, it’s listed as supported. I’ve done the wiring according to netatmo but still have issues once the setup completes leading me to believe I need to set the chime module to low -2 but not sure.
Also not sure where to get the right 12v 2amp here in the uk as most chimes and transformers are all 8v 1amp.
Re: Byron 776 insufficient power source
Hi please could you tell me did you manage to solve the power issue with the Byron and power to the video doorbell?
Thanks
Paul
Thanks
Paul
-
- Posts: 196
- Joined: 07 Apr 2019, 17:49
- Location: United Kingdom
Re: Byron 776 insufficient power source
I have the same Byron 776. I attempted to install the netatmo doorbell following the instructions. When I turned the power back on the chime is audibly vibrating continuously and there is no LED light at all ok the doorbell. I have disconnected the doorbell for now whilst I wait for Netatmo Support to reply as I have raised a ticket via the Netatmo help centre.The fuse has not flown as the LED lights up fine when connected to a computer.
-
- Posts: 196
- Joined: 07 Apr 2019, 17:49
- Location: United Kingdom
Re: Byron 776 insufficient power source
localvscloud wrote: ↑19 Dec 2022, 12:09 I have the same Byron 776. I attempted to install the netatmo doorbell following the instructions. When I turned the power back on the chime is audibly vibrating continuously and there is no LED light at all ok the doorbell. I have disconnected the doorbell for now whilst I wait for Netatmo Support to reply as I have raised a ticket via the Netatmo help centre.The fuse has not flown as the LED lights up fine when connected to a computer.
Issue resolved, wires in the wire connector were not securely connected, all working now.