Netatmo doorbell is off and chime keeps buzzing

Post Reply
mobimaniak
Posts: 1
Joined: 10 Feb 2016, 22:09

Netatmo doorbell is off and chime keeps buzzing

Post by mobimaniak »

I have chime zamel gns-921 (electromechanical chime connected to 230V AC).
I have setup netatmo doorbell following installation manual:
1.mounted chime module as attached in the picture (I have classic doorbell wiring on 230V AC)
2.plugged netatmo doorbell into wall mount
3. blue light was glowing
4.changed the position of chime module from 1-low to 1-high
5.pressed ring button - chime started continuously ringing

6. removed doorbell and reset it and changed the position to 1-low
7. plugged doorbell back (noticed also fuse was blown within dorbell and I replaced it)
8. Now doorbell light is off and chime is continuously buzzing - I suspect chime module is not working ok.


Not sure what I did wrong. I followed also instructions to reset doorbell.
Can you please suggest what needs to be done.
Is it something wrong with netatmo doorbell or chime module? How do I know if chime module is still ok?
Now If I plug netatmo doorbell on usb I see green ligh on it.
Attachments
tempImageOe35Ah.gif
tempImageOe35Ah.gif (6.25 MiB) Viewed 1037 times
tempImage8lkbD9.gif
tempImage8lkbD9.gif (6.32 MiB) Viewed 1037 times
Post Reply

Return to “Electrical Wiring”