Mainstation: connected, but no temperature etc. shown!

This forum provides technical help on how to set up Netatmo Weather Stations for the first time.
Post Reply
topsurfer
Posts: 24
Joined: 06 Jun 2013, 16:55

Mainstation: connected, but no temperature etc. shown!

Post by topsurfer »

Hi,
I have an older Netatmo station (bought 2013 !), most time it works well. (also outdoor station and wind and rain)
Now, since 2 two days, the main station is not showing any measure date, history stops on monday 6:30
I no changes are don in my side, also no network changes.

I try to re-install (pressing the button 10 s ...) the main station several times. Router see the station again, but on the App I don't see any data (no temperature, no noise ...). But I see that it was updated 49s before !?
Pressing the "on demand button", push message appear, so the station seems connected to the router (BT is off on the smartphone).

I also update the (Android) App, inside there I try to remove the listed main-station (rain and wind station are shown also), but since 18 hours I get:
Error appear. Should try later".

Any ideas?
Is the station to old for the new (Android) App (Firmware: 177; Hardware-version v2) or the Netatmo-servers ??

Thx for any hints and ideas !
Attachments
netatmo-no-main-data.jpg
netatmo-no-main-data.jpg (34.9 KiB) Viewed 692 times
Post Reply

Return to “Setting up my Weather Station”