WLAN changed, how to reconnect?

This forum provides technical help on how to set up Netatmo Weather Stations for the first time.
Post Reply
philippmn
Posts: 3
Joined: 24 Jul 2021, 14:38

WLAN changed, how to reconnect?

Post by philippmn »

Hi all,
I had to implement a new WLAN.
What do I have to do, to get Netatmo Weather Station Basis, Outdoor and 1 Indoor Module running again?
I am using the PC App to reconnect but my windows pc does not recognize the basis module...

BR Philipp
GEORGzer
Posts: 2663
Joined: 14 Jan 2014, 18:14

Re: WLAN changed, how to reconnect?

Post by GEORGzer »

Have you connected the weather Station to the PC, using an USB cable?
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors

Not a Netatmo employee
philippmn
Posts: 3
Joined: 24 Jul 2021, 14:38

Re: WLAN changed, how to reconnect?

Post by philippmn »

I tried, but it doesnt recognize the netatmo station. Tried different cables and usb ports... no success.
Is there any other way to connect?
Shitware...
GEORGzer
Posts: 2663
Joined: 14 Jan 2014, 18:14

Re: WLAN changed, how to reconnect?

Post by GEORGzer »

Are you using the „module manager“ software or just the web app?
https://www.netatmo.com/en-us/start/station

If so and it is still unresponsive, you could try to reset the station.
https://helpcenter.netatmo.com/en-us/sm ... -procedure
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors

Not a Netatmo employee
Post Reply

Return to “Setting up my Weather Station”