Advanced algorithms (PID and Heating Prediction) computation

Tips, tricks and frequently asked questions
stanikuz
Posts: 77
Joined: 19 Jan 2014, 13:48
Location: Moscow
Contact:

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by stanikuz » 22 Nov 2020, 09:13

Mida wrote:
19 Nov 2020, 01:24
Hello,
on Sunday 15.11. I installed this controller and yesterday (November 17) I received a notification that I have an available PID heating mode. I accidentally clicked "Not now" instead of "Activate."
Screenshot in attachment.
Will I ever see this message again? You do not know what all the items for become available when clicking on "Activate"?

Thank you in advance for your answers,
Mira
Did you resolved this? I gave advice concerning it.
Stan Kuznetsov
Weather: 2x Weather Stations + 6x Indoor Modules + 2x Rain + 2x Wind Gauges + 1x Home Coach
Security: 2x Welcome + 2x Presence Cameras + 3x Smoke Alarms + 3x Door/Window Sensors
Energy: 4x Smart Valves with Relay + 1x Thermostat with Relay

Mrsv
Posts: 32
Joined: 23 Nov 2018, 21:56

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by Mrsv » 22 Nov 2020, 11:31

try to explain the problem: as many users, my PID doesn't work. It works like a bad hysteresis with complete loss of comfort. It's like a yoyo with a big oscillation in the room temperature.
I've three thermostats in my house and several valves. The first is at the 1st floor, with 4 valves. The thermostat id is j102cc6 firmware 73 and the relè id is g1005e2 with firmware 216. Same situation at the second floor with the thermostat and 4 valves. Thermostat id is j308f24 firmware 73 and relè g30c088 firmware 216. The third floor only has a thermostat (it's an open space) with thermostat j0d93a8 firmware 72 and relè g0d71ec firmware 210.
I read on the french section of netatmo forum that some users have got a new firmware for thermostat and relè respectively firmware 75 and firmware 222 that make PID again functionally.
I ask, if possible, to push in my product this new firmware, because the winter is knocking at the door and I need that PID working well for my comfort and because I bought several of this product for a better life.
Thanks in advance and sorry for my bad english.
Best regards.
Fabrizio

THERMOSTAT j102cc6 V 73 RELE' g1005e2 V 216
THERMOSTAT j308f24 V 73 RELE' g30c088 V 216
THERMOSTAT j0d93a8 V 72 RELE' g0d71ec V 210

merced
Posts: 4
Joined: 15 Jun 2017, 10:05

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by merced » 22 Nov 2020, 19:16

Please upgrade:

j1e9e10 relè g1ebbf8
j104a40 relè g104af4
j104c2a relè g10332c


to date all 3 thermostats are stopped at fw 72 with relè 210, with a totally ineffective advanced algorithm.

samueleg
Posts: 1
Joined: 22 Nov 2020, 19:44

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by samueleg » 22 Nov 2020, 19:46

I have the same problem... inefficient algorithm with fw 72 / 210

Please upgrade:

j1c076a relè g1bb4a6


Thanks.

fmarzocca
Posts: 46
Joined: 13 Nov 2016, 17:18

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by fmarzocca » 23 Nov 2020, 10:11

Please upgrade:

thermostat: j34153a
relè: g3458e0

Mrsv
Posts: 32
Joined: 23 Nov 2018, 21:56

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by Mrsv » 24 Nov 2020, 07:42

Thank you very much. All products are updated!
Thanks again.
Fabrizio

gasman1844
Posts: 1
Joined: 24 Nov 2020, 15:21

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by gasman1844 » 24 Nov 2020, 15:31

I've also had problems with the advanced algorithm. It's frustrating as I live in an old house and see large swings with the hysteresis option.
It's so poor I've actually tried a program of firing the boiler every half hour for a few minutes to try to reduce the swings.
Would you please upgrade the firmware to the relay 222 and thermostat 75

Relay is g0aae30
Thermostat is g0a99f4

Regards
Mike Bennett

Post Reply

Return to “General questions”