Relay cable wiring?

Tips, tricks and frequently asked questions
Post Reply
mistagi
Posts: 1
Joined: 18 Oct 2021, 16:55

Relay cable wiring?

Post by mistagi »

Hello,

I accidentally broke the realy cable connector by removing it from the relay. Unfortunately I pulled out all the 4 wires from the connector and i'm not sure how to reassamble it. Maybe you can help?

I attached some pictures, maybe that makes it a little easier to explain.

There are 4 cables:
Blue
Brown
Grey
Black

And there are 4 connector positions. I marked them with 1-4.


Any help is much appreciated!

Thanks in advance,
Daniel
Attachments
1634569421322.jpg
1634569421322.jpg (221.98 KiB) Viewed 1185 times
1634569421311.jpg
1634569421311.jpg (360.29 KiB) Viewed 1185 times
GEORGzer
Posts: 2663
Joined: 14 Jan 2014, 18:14

Re: Relay cable wiring?

Post by GEORGzer »

I don‘t know the correct wiring, sorry.
But I‘d highly suggest to contact support and ask for a replacement.

https://helpcenter.netatmo.com
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors

Not a Netatmo employee
mehgy
Posts: 2
Joined: 19 Oct 2021, 12:59

Re: Relay cable wiring?

Post by mehgy »

1 -Blue
2 -Grey
3 -Black
4 - Brown
Attachments
netatmo-1.JPG
netatmo-1.JPG (174.79 KiB) Viewed 1143 times
Post Reply

Return to “General questions”