How to mount the relè in a 503 wall box

Tips, tricks and frequently asked questions
cucca
Posts: 12
Joined: 19 Dec 2017, 21:25

Re: how to fix the relè in a 503 wall box

Post by cucca »

alpesm wrote:Yeah in this way is more difficult because you need to fix in some way the base of the relais, otherwise it will be not perpendicular!
Try to fix the base of the relais on the back of the 503 cover!
i thought about the solution to fix the base of the relè on the back of the 503 cover and maybe fix it with 2 screws, but i my first attempt to fix it with an hole in the 503 cover there were not contact with the boiler pins (everything was working except the boiler :) ). So i've enlarged the hole to let the connector passthrought the cover and join the relè... So i think that the thickness of the 503 cover could avoid a perfect join between the connector and the relè
GEORGzer
Posts: 2663
Joined: 14 Jan 2014, 18:14

Re: how to fix the relè in a 503 wall box

Post by GEORGzer »

Can't you just take the provided Relais cable, screw/glue it to one of those 503 covers, connect the cables (which may have to be shortened), put the cover on the box and mount the Relais on the cable-connector?

https://pro.netatmo.com/client/assets/i ... /elem7.jpg
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors

Not a Netatmo employee
cucca
Posts: 12
Joined: 19 Dec 2017, 21:25

Re: how to fix the relè in a 503 wall box

Post by cucca »

GEORGzer wrote:Can't you just take the provided Relais cable, screw/glue it to one of those 503 covers, connect the cables (which may have to be shortened), put the cover on the box and mount the Relais on the cable-connector?

]https://pro.netatmo.com/client/assets/i ... /elem7.jpg
well, I solve my problem making an hole in the 503 cover a little bigger than the cable-connector :)
Brieuc_Netatmo
Posts: 3088
Joined: 02 Jan 2014, 11:20

Re: how to fix the relè in a 503 wall box

Post by Brieuc_Netatmo »

Hi,
We made a dedicated wall mount for "503" boxes: https://shop.netatmo.com/it-it/energy/a ... er-scatola
Thank you!
Brieuc - Netatmo Team
Locked

Return to “General questions”