Page 1 of 1

Away mode for HomeKit

Posted: 08 May 2019, 11:33
by ChuckstarUK
Please could you consider adding the capability to set the Thermostat’s “Away Mode” in HomeKit, so that it can be included in Scenes. Currently you can only set the heating on and off and set the temperature.

Re: Away mode for HomeKit

Posted: 31 Aug 2019, 16:32
by rodcaine
I second this. It’s annoying not to have automatic frost protection when it would be so easy to implement

Re: Away mode for HomeKit

Posted: 04 Dec 2019, 12:15
by box
Digging up an old post... as the Netatmo app doesn't natively support geofencing, utilising Homekit for this would be really useful and (I'm assuming) straightforward to implement in a better way.
Ignoring manual boosts, the only other setting the Netatmo system can recieive from Homekit is on or off. It would be great if in the Netatmo app there was a setting to change what happens when an off/on command is received from Homekit. E.g. have a menu to choose from Thermostat Off, Away, or Frost Protection modes. This way with location based automations when everyone leaves the house, Homekit sets the heating to 'Off', which is interpreted by Netatmo system as Away mode, and resumes normal schedule when Homekit says 'on' again when someone arrives home.
Sounds like an easy way to get this implemented?

Re: Away mode for HomeKit

Posted: 06 Dec 2019, 12:37
by 568ml
This would be great, but one problem is that (as far as I'm aware) HomeKit doesn't have a notion of turning the thermostat 'on' — you have to set it to an explicit temperature. What would be ideal is for a simple 'on' command that would be interpreted by the Netatmo app as 'resume schedule'.