Thermostat keeps losing connection

Tips, tricks and frequently asked questions
Post Reply
Mark@BC
Posts: 279
Joined: 15 Nov 2019, 21:32

Thermostat keeps losing connection

Post by Mark@BC »

I have a room with a separate Netatmo thermostaat (wired) + 1 valve.

The problem is that the thermostat is losing connection to the relay several times a day. After reconnecting the thermostat gives 19degrees as wanted temperature so the heating turns on, but it is normally set at 6 degrees (room not in use).
Now the boiler turns on and starts heating, when is is not necessary and burns gas/ money.

I already took the batteries out of the thermostat, reset the relay by pressing the button for 20 secondes and replaced the relay. Nothing helps!

Anyone whit the same issue and probably a solution?
1x Presence outdoor camera siren V3.18.0
2x Thermostat V76 + 10x Valves V100 + relais 236
1x weather station v202, outdoor module V53 and additional indoor module V53
Post Reply

Return to “General questions”