Hello,
I accidentally broke the realy cable connector by removing it from the relay. Unfortunately I pulled out all the 4 wires from the connector and i'm not sure how to reassamble it. Maybe you can help?
I attached some pictures, maybe that makes it a little easier to explain.
There are 4 cables:
Blue
Brown
Grey
Black
And there are 4 connector positions. I marked them with 1-4.
Any help is much appreciated!
Thanks in advance,
Daniel
Relay cable wiring?
Relay cable wiring?
- Attachments
-
- 1634569421322.jpg (221.98 KiB) Viewed 1202 times
-
- 1634569421311.jpg (360.29 KiB) Viewed 1202 times
Re: Relay cable wiring?
I don‘t know the correct wiring, sorry.
But I‘d highly suggest to contact support and ask for a replacement.
https://helpcenter.netatmo.com
But I‘d highly suggest to contact support and ask for a replacement.
https://helpcenter.netatmo.com
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Re: Relay cable wiring?
1 -Blue
2 -Grey
3 -Black
4 - Brown
2 -Grey
3 -Black
4 - Brown
- Attachments
-
- netatmo-1.JPG (174.79 KiB) Viewed 1160 times