Advanced algorithms (PID and Heating Prediction) computation

Tips, tricks and frequently asked questions
ChrisSs
Posts: 5
Joined: 15 Feb 2021, 22:49

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by ChrisSs »

Please update the 3 valves connected to relay 70:ee:50:60:2a:ea
Merci beaucoup
kotrna
Posts: 2
Joined: 23 Dec 2021, 10:20

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by kotrna »

I have installed the two thermostats since November 11 st and I do not have calculated PID algorithm yet. Please update algorihtm for me.

1: Relay g6d6c4e Thermostat j6dc40a
2: Relay g6dac06 Thermostat j6d9fd2

Thak You
stanikuz
Posts: 107
Joined: 19 Jan 2014, 13:48
Location: Moscow
Contact:

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by stanikuz »

kotrna wrote: 23 Dec 2021, 10:31 I have installed the two thermostats since November 11 st and I do not have calculated PID algorithm yet. Please update algorihtm for me.

1: Relay g6d6c4e Thermostat j6dc40a
2: Relay g6dac06 Thermostat j6d9fd2

Thak You
As I remember you should turn on this algorithm via corresponding setting in your account. Did you turn it on?
Stan Kuznetsov
Weather: 3x Stations + 7x Indoor Modules + 3x Rain + 2x Wind + 2x Home Coach
Security: 3x Welcome + 2x Presence + 3x Smoke Alarms + 1x CO2 Alarm + 20x Door/Window Sensors + 1x Doorbell
Energy: 7x Valves + 1x Thermostat with 3x Relays
kotrna
Posts: 2
Joined: 23 Dec 2021, 10:20

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by kotrna »

Hello, PID algorithm is not available for me. I check it now.

Thank you for you control.
aighpanzer
Posts: 3
Joined: 01 Mar 2015, 15:08
Location: Italy

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by aighpanzer »

kotrna wrote: 23 Dec 2021, 20:25 Hello, PID algorithm is not available for me. I check it now.

Thank you for you control.
Hello,

Same here. After more of three weeks, PID is not available. Can someone force this algorithm?
barat
Posts: 27
Joined: 29 Sep 2021, 21:46

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by barat »

Can advanced algo take water temp into consideration? Maybe in-app setting like declaring that water temp is now 55* or 45*?
Usecase:
When temp outside is above -8*C my water temp is 45*C so my heaters have certain power (W)
When it's getting colder like -10* and less all the time I set my boiler to 55*C which also increases the power of the heater
In ideal world when I'll increase/decrease boiler water temp it'll be like this for more then two weeks, so algo will "re-learn" itself.
In real world - there will be one week of really cold period, and then again more "closer to 0" times.

What I would love is, that when I go to my boiler and change temperature I can activate a "preset" for thermostat - it can start with what it learned previously and eventually adapt.
Now, when I change to this "emergency" higher temperature I just need to deactivate advanced algs and fallback to hysteresis. This makes schedule obsolete (since it's based on target temp, not when to start the heating), and eventually I need to also change schedule to "hysteresis one".
Can it be done, so that advanced algo is either connected to some preset (like boiler temp, or just "profiles"), or at least per schedule?
camusshaka
Posts: 3
Joined: 18 Nov 2022, 09:28

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by camusshaka »

Hello, please could you upgrade my system please?
True temperature does not work, I cannot correct the true temperature and the valve thermostat reports incorrect temperatures.

Relay:
- Serial number g0f20f2
- Firmware 222

Valve:
- Serial number o14db56, o047439, o047718, o14fa53
- Firmware 85

Thanks
b4rb4r4
Posts: 2
Joined: 19 Nov 2022, 07:42

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by b4rb4r4 »

Hello, please could you upgrade my system please?

Thermostaat:
Serienummer j68dbe0
firmware 75

Relay:
Serienummer g68c482
Firmware 222

Valve:
Serienummer o1a371b, o1a3713, o1a3766
firmware 48


tnx!
AFABER
Posts: 3
Joined: 09 Oct 2018, 14:09

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by AFABER »

camusshaka wrote: 18 Nov 2022, 12:11 Hello, please could you upgrade my system please?
True temperature does not work, I cannot correct the true temperature and the valve thermostat reports incorrect temperatures.

Relay:
- Serial number g0f20f2
- Firmware 222

Valve:
- Serial number o14db56, o047439, o047718, o14fa53
- Firmware 85

Thanks
Hello together,

The same is true for my system! Beginnig on Thursday my system does not realize temprature changes by using True Temprature any more. Moreover the system measures the temprature in the living room at 31.4C - but the room is damn cold!

Hope for help!

Relay:
Serial No.: 70:ee:50:0b:a6:96
Valves:
Serial No:
09:00:00:00:3e:f9
09:00:00:02:e0:20
09:00:00:17:53:ee
09:00:00:00:bd:c8
09:00:00:00:80:68
09:00:00:16:19:3d
09:00:00:00:49:f6
09:00:00:00:f1:2d
09:00:00:00:c9:45
09:00:00:00:83:3b
09:00:00:03:24:0f
09:00:00:02:c7:4f
09:00:00:16:23:d0

Thanks in advance!
freddino
Posts: 3
Joined: 18 May 2017, 11:08

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by freddino »

Hello there,
My thermostat has been working for two month bust still no PID algorithm available.
Could you please update the algorithm?
Merci beaucoup!
Thermostat 04:00:00:07:e5:38
Valves
09:00:00:01:b0:75
09:00:00:04:46:04
09:00:00:01:b0:51
09:00:00:01:0e:f6
09:00:00:04:42:f4
09:00:00:04:46:1a
09:00:00:01:11:31
09:00:00:04:49:c6
Post Reply

Return to “General questions”