Hi,
Further to my previous post about my Smart valves not updating I have listed below the serial numbers of all the devices.
Relay - 70:EE:50:0a:ba:b0
Thermostat - 04:00:00:0a:b9:28
Smart valve - 09:00:00:15:00:c1
Smart valve - 09:00:00:15:00:f8
Smart valve - 09:00:00:15:06:0f
Smart valve - 09:00:00:14:f9:ca
Smart valve - 09:00:00:14:f4:13
Smart valve - 09:00:00:14:f6:12
The valves are still only showing firmware V48
Thanks in advance for any help or advice.
Advanced algorithms (PID and Heating Prediction) computation
-
- Posts: 3088
- Joined: 02 Jan 2014, 11:20
Re: Advanced algorithms (PID and Heating Prediction) computation
Hi Chrisg,
I cannot see anything wrong on your devices, radio signals are good. I've updated your Relay to check if it changes anything.
It is most likely your Relay has frequent power losses, which could explain that it's not able to deploy the firmwares on your Valves.
Please check carefully its power supply. You can also try to power it from an outlet until all Valves are updated.
In the meantime, I've enabled log generation for your Relay's radio connectivity, we will investigate if you confirm there is no power loss.
I cannot see anything wrong on your devices, radio signals are good. I've updated your Relay to check if it changes anything.
It is most likely your Relay has frequent power losses, which could explain that it's not able to deploy the firmwares on your Valves.
Please check carefully its power supply. You can also try to power it from an outlet until all Valves are updated.
In the meantime, I've enabled log generation for your Relay's radio connectivity, we will investigate if you confirm there is no power loss.
Brieuc - Netatmo Team
Re: Advanced algorithms (PID and Heating Prediction) computation
Hello,
Thank you for the response.
I have no power issues with the relay and have a good Wi-Fi signal through out the house. Howevere I have power cycled every device this evening.
Having also checked the devices this evening, the relay and the thermostat have both updated their firmware V222 & V75 respectively.
Thank you for the response.
I have no power issues with the relay and have a good Wi-Fi signal through out the house. Howevere I have power cycled every device this evening.
Having also checked the devices this evening, the relay and the thermostat have both updated their firmware V222 & V75 respectively.
Re: Advanced algorithms (PID and Heating Prediction) computation
The valves will normally follow within 1-3 days
1x Presence outdoor camera siren V3.18.0
2x Thermostat V76 + 10x Valves V100 + relais 236
1x weather station v202, outdoor module V53 and additional indoor module V53
2x Thermostat V76 + 10x Valves V100 + relais 236
1x weather station v202, outdoor module V53 and additional indoor module V53
Re: Advanced algorithms (PID and Heating Prediction) computation
All valves updated to V85 overnight.
Thanks all for your help.
Thanks all for your help.
Re: Advanced algorithms (PID and Heating Prediction) computation
Please...I have problem with PID and anticipation...can you push new firmware for :
Relè : g575b84
Thermostat : j5749c6
Valves : o05f901
Valves : o06078d
Valves : o05d2f0
Valves : o0506fc
Valves : o05d2da
Valves : o069978
Valves : o0632c4
Thanks
Relè : g575b84
Thermostat : j5749c6
Valves : o05f901
Valves : o06078d
Valves : o05d2f0
Valves : o0506fc
Valves : o05d2da
Valves : o069978
Valves : o0632c4
Thanks
Re: Advanced algorithms (PID and Heating Prediction) computation
After 16 days my thermostat doesn't have yet deployed the PID algorithm. Is it normal? What can I do to expedite the process?
Relay: g5db53a
Thermostat: j5d9b18
Thanks
Fabio
Relay: g5db53a
Thermostat: j5d9b18
Thanks
Fabio
Re: Advanced algorithms (PID and Heating Prediction) computation
Hello my pid dont work well. Please update my firmware.
Rele: 70:ee:50:1b4c - Firm 210
Thermostat: 04:00:00:1c:15:08 - Firm 72
Thanks!!!
Rele: 70:ee:50:1b4c - Firm 210
Thermostat: 04:00:00:1c:15:08 - Firm 72
Thanks!!!
Re: Advanced algorithms (PID and Heating Prediction) computation
The True Temperature does not work.
Valves do not start the boiler (comfort priority is on).
Please update these:
Relè : 70ee50603516
Thermostat : 04000055307c
Valves : 09000012f753
Valves : 09000012fd21
Valves : 09000012f74b
BR,
Vlad
Valves do not start the boiler (comfort priority is on).
Please update these:
Relè : 70ee50603516
Thermostat : 04000055307c
Valves : 09000012f753
Valves : 09000012fd21
Valves : 09000012f74b
BR,
Vlad
Re: Advanced algorithms (PID and Heating Prediction) computation
Hello,
I have been strugling with this overshooting issue too since start of this year’s heating season and now discovered this thread! Can you please update?
Relay (fw 210): g0b08ca
Thermostat (fw 72): j0afa9a
Thanks!
I have been strugling with this overshooting issue too since start of this year’s heating season and now discovered this thread! Can you please update?
Relay (fw 210): g0b08ca
Thermostat (fw 72): j0afa9a
Thanks!