Advanced algorithms (PID and Heating Prediction) computation

Tips, tricks and frequently asked questions
JohnW
Posts: 35
Joined: 04 Apr 2020, 14:57

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by JohnW »

Hi,

I am still on FW 72/210 and am also suffering from overshoots on the Advanced heating algorithm. Could I request a FW update as well please

Thermostat j0bcd60 / Relay g0b9d7a

Many thanks
geims
Posts: 5
Joined: 13 Jul 2018, 12:01

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by geims »

Hello,
same situation, thermostat overshooting and warking almost in hysteresis mode...

relay: g1a9068 - fw 210
thermostat: j1a89ea - fw 72
JohnW
Posts: 35
Joined: 04 Apr 2020, 14:57

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by JohnW »

Hi,

Very quick response - thanks. Relay firmware updated within a couple of hours and Thermostat followed a few hours later. Already seeing an improvement on overshoots
leventozler
Posts: 1
Joined: 03 Dec 2020, 14:29

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by leventozler »

Hello,

Same problem here, swinging 0.4-0.5 degrees with firmware 210. Works worse than hysteresis.

Relay: g0dfcb8
Thermostat: j0db0b0

Thanks
Mark@BC
Posts: 279
Joined: 15 Nov 2019, 21:32

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by Mark@BC »

Hello Netatmo,

Can you please update the firmware on both my thermostats and relays?
Relay 1: g10da6a
Thermostat 1: j10e208

Relay 2: g345a1a
Thermostat 2: j1ab844

Thank you 👍
1x Presence outdoor camera siren V3.18.0
2x Thermostat V76 + 10x Valves V100 + relais 236
1x weather station v202, outdoor module V53 and additional indoor module V53
Gokhan
Posts: 1
Joined: 04 Dec 2020, 05:13

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by Gokhan »

Dear Netatmo,

As I had requested earlier through your support page (ticket #2717629 & #2718603), I will appreciate if you could push the latest firmware(s) to my relay and thermostat please - having issues with the PID algorithm as other users in this topic.

Relay S.N. : g10d0de
Thermostat S.N. : j10cc72

Thank you
Last edited by Gokhan on 04 Dec 2020, 12:07, edited 1 time in total.
fmarzocca
Posts: 72
Joined: 13 Nov 2016, 17:18

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by fmarzocca »

Please upgrade:

Thermostat: j1a6b04
Relay: g1a7f7c
vojta66
Posts: 369
Joined: 21 Jan 2016, 11:56
Contact:

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by vojta66 »

Please update:
Relay: g348ca4
Thermostat: j3487bc

Thanks indeed!
1Welcome(512), 9 tags (v58), 1Smart Smoke (v108),1Smart Siren (v209)
1 Weather Station(v181), Outdoor module (50),Rain Gauge(v12),Wind Gauge(v25),3 Indoor Modules (v51)
1Thermostat(v75+relay 2nd generation v222 + 5Valves (v85)
2Presence cameras(320)
Mark@BC
Posts: 279
Joined: 15 Nov 2019, 21:32

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by Mark@BC »

Mark@BC wrote: 03 Dec 2020, 19:51 Hello Netatmo,

Can you please update the firmware on both my thermostats and relays?
Relay 1: g10da6a
Thermostat 1: j10e208

Relay 2: g345a1a
Thermostat 2: j1ab844

Thank you 👍
All valves, relays and thermostat 2 are updated. Valves are now fw84, relay fw222 and thermostat 2 fw75.

Only thermostat 1: j10e208 did not get the update.

Can you please solve this @netatmo?

Thank you for the quick response 👍

Update:

Now everything is up to date, thank you
1x Presence outdoor camera siren V3.18.0
2x Thermostat V76 + 10x Valves V100 + relais 236
1x weather station v202, outdoor module V53 and additional indoor module V53
GiorgioTozzoli
Posts: 1
Joined: 06 Dec 2020, 10:41

Re: Advanced algorithms (PID and Heating Prediction) computation

Post by GiorgioTozzoli »

Please update:
Relay: g1ae288
Thermostat: j1ac99e

Thanks indeed!
Post Reply

Return to “General questions”