Firmware upgrade

Tips, tricks and frequently asked questions
Locked
GEORGzer
Posts: 1964
Joined: 14 Jan 2014, 18:14

Re: Firmware upgrade

Post by GEORGzer »

So it is possible to do a firmware update yourself with the installation wizard?
Home: Weather Station (V3 + Rain Gauge, Wind Gauge, 3 additional Indoor Modules), Valves Starter Pack + 5 additional Valves, Smart Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smart Smoke Alarm

Not a Netatmo employee
fabiochi
Posts: 54
Joined: 03 Sep 2015, 06:13

Re: Firmware upgrade

Post by fabiochi »

Correct. With installation wizard you can upgrade relay fw. Then relay upgrades thermostat automatically in few hours.
yvoswillens
Posts: 3
Joined: 25 Oct 2016, 15:29

Re: Firmware upgrade

Post by yvoswillens »

My relais ( 70:ee:50:1a:cc:6a ) has firmware 71.
But my thermostat ( j1ab682 ) is still on 40.

How can I trigger the upgrade on the thermostat?
Or can this be triggered remotely?

Thanks
Michael0610
Posts: 41
Joined: 01 Aug 2016, 15:02

Re: Firmware upgrade

Post by Michael0610 »

Does it continue in PID mode or is it starting all over again, when doing the install wizard?
iChicco91
Posts: 5
Joined: 17 Oct 2016, 18:30

Re: Firmware upgrade

Post by iChicco91 »

fabiochi wrote: @Brieuc_Netatmo: which are the differences between relay fw 68 and 71 behind the support for HomeKit? which is the roadmap Netatmo has for old relay (blue light one)? I think Netatmo has to clarify it to all the people having spent money with devices became old in few months
Thanks
fabio
Moreover would be great to have the changelog. I think this kind of support involving end-users is great to have a lot of feedbacks, but Netatmo staff hardly reply here...
CHSP
Posts: 1
Joined: 27 Oct 2016, 18:04

Re: Firmware upgrade

Post by CHSP »

Can you please update firmware?

Serial thermostat : j075d6c
Firmware 40

Relais : 70:ee:50:07:45:76
Firmware 68

Thanks!
Judge584
Posts: 26
Joined: 12 Jun 2016, 23:00
Location: France

Re: Firmware upgrade

Post by Judge584 »

yvoswillens wrote:My relais ( 70:ee:50:1a:cc:6a ) has firmware 71.
But my thermostat ( j1ab682 ) is still on 40.

How can I trigger the upgrade on the thermostat?
Or can this be triggered remotely?

Thanks
Your firmware iOS up to date. 40 is latest firmware for thermostat.
Judge584
Posts: 26
Joined: 12 Jun 2016, 23:00
Location: France

Re: Firmware upgrade

Post by Judge584 »

CHSP wrote:Can you please update firmware?

Serial thermostat : j075d6c
Firmware 40

Relais : 70:ee:50:07:45:76
Firmware 68

Thanks!
Did you tried to update it yourself?
Rerun wifi configuration from Netatmo thermostat app.
Once done remove batteries from your thermostat, then put them back in.
Wait 6 hours... Your thermostat should be up to date.
sam75
Posts: 3
Joined: 10 Oct 2016, 12:15

Re: Firmware upgrade

Post by sam75 »

Hello,
mistake in this post, at the date of 29 october 2016, the firmware version up to date, for the thermostat with white light is not relay 71 and thermostat 60, but is :
- relay 71
- thermostat 40
Regards
fabiochi wrote:I did the same and successfully updated the relay fw with installation wizard. After few hours it updated the thermostat as well.
Now I have
- old thermostat/relay with blue light: relay 68 and thermostat 60
- new thermostat/relay with white light: relay 71 and thermostat 60
It seems Netatmo has different fw for old and new relay
@Brieuc_Netatmo: which are the differences between relay fw 68 and 71 behind the support for HomeKit? which is the roadmap Netatmo has for old relay (blue light one)? I think Netatmo has to clarify it to all the people having spent money with devices became old in few months
Thanks
fabio
Crazyclimber
Posts: 4
Joined: 14 Oct 2016, 06:51

Re: Firmware upgrade

Post by Crazyclimber »

Thank you for upgrading, but it still not working with iOS 10 home app
Locked

Return to “General questions”