Firmware upgrade
Re: Firmware upgrade
So it is possible to do a firmware update yourself with the installation wizard?
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Re: Firmware upgrade
Correct. With installation wizard you can upgrade relay fw. Then relay upgrades thermostat automatically in few hours.
-
- Posts: 3
- Joined: 25 Oct 2016, 15:29
Re: Firmware upgrade
My relais ( 70:ee:50:1a:cc:6a ) has firmware 71.
But my thermostat ( j1ab682 ) is still on 40.
How can I trigger the upgrade on the thermostat?
Or can this be triggered remotely?
Thanks
But my thermostat ( j1ab682 ) is still on 40.
How can I trigger the upgrade on the thermostat?
Or can this be triggered remotely?
Thanks
-
- Posts: 41
- Joined: 01 Aug 2016, 15:02
Re: Firmware upgrade
Does it continue in PID mode or is it starting all over again, when doing the install wizard?
Re: Firmware upgrade
Moreover would be great to have the changelog. I think this kind of support involving end-users is great to have a lot of feedbacks, but Netatmo staff hardly reply here...fabiochi wrote: @Brieuc_Netatmo: which are the differences between relay fw 68 and 71 behind the support for HomeKit? which is the roadmap Netatmo has for old relay (blue light one)? I think Netatmo has to clarify it to all the people having spent money with devices became old in few months
Thanks
fabio
Re: Firmware upgrade
Can you please update firmware?
Serial thermostat : j075d6c
Firmware 40
Relais : 70:ee:50:07:45:76
Firmware 68
Thanks!
Serial thermostat : j075d6c
Firmware 40
Relais : 70:ee:50:07:45:76
Firmware 68
Thanks!
Re: Firmware upgrade
Your firmware iOS up to date. 40 is latest firmware for thermostat.yvoswillens wrote:My relais ( 70:ee:50:1a:cc:6a ) has firmware 71.
But my thermostat ( j1ab682 ) is still on 40.
How can I trigger the upgrade on the thermostat?
Or can this be triggered remotely?
Thanks
Re: Firmware upgrade
Did you tried to update it yourself?CHSP wrote:Can you please update firmware?
Serial thermostat : j075d6c
Firmware 40
Relais : 70:ee:50:07:45:76
Firmware 68
Thanks!
Rerun wifi configuration from Netatmo thermostat app.
Once done remove batteries from your thermostat, then put them back in.
Wait 6 hours... Your thermostat should be up to date.
Re: Firmware upgrade
Hello,
mistake in this post, at the date of 29 october 2016, the firmware version up to date, for the thermostat with white light is not relay 71 and thermostat 60, but is :
- relay 71
- thermostat 40
Regards
mistake in this post, at the date of 29 october 2016, the firmware version up to date, for the thermostat with white light is not relay 71 and thermostat 60, but is :
- relay 71
- thermostat 40
Regards
fabiochi wrote:I did the same and successfully updated the relay fw with installation wizard. After few hours it updated the thermostat as well.
Now I have
- old thermostat/relay with blue light: relay 68 and thermostat 60
- new thermostat/relay with white light: relay 71 and thermostat 60
It seems Netatmo has different fw for old and new relay
@Brieuc_Netatmo: which are the differences between relay fw 68 and 71 behind the support for HomeKit? which is the roadmap Netatmo has for old relay (blue light one)? I think Netatmo has to clarify it to all the people having spent money with devices became old in few months
Thanks
fabio
-
- Posts: 4
- Joined: 14 Oct 2016, 06:51
Re: Firmware upgrade
Thank you for upgrading, but it still not working with iOS 10 home app