Visibility temperatures

Tips, tricks and frequently asked questions
juppeke
Posts: 1
Joined: 17 Feb 2017, 12:39

Visibility temperatures

Post by juppeke » 17 Feb 2017, 12:46

Hi all,

is it possible to change place/font of desired and actual temperature?
As it is now, the desired temp is showed in BOLD, actual temp is displayed in outlined font.

From a distance, it's very easy to see the desired , but not the actual temp. Maybe I'm strange, but I'm more interested in actual temp, because I know what temp is wanted.

thx for your input

greetz

movis
Posts: 1
Joined: 18 Mar 2017, 12:24

Re: Visibility temperatures

Post by movis » 25 Apr 2017, 20:57

I have the same objection. It should be a feature request: enable swapping outline and bold fonts for desired and actual temperature.

MarcV
Posts: 379
Joined: 22 Aug 2016, 09:01
Location: Schoten, Belgium

Re: Visibility temperatures

Post by MarcV » 08 Jun 2017, 17:12

I would like to have this changed too. In dim lighting conditions it is impossible to read the display...
...but I might be wrong...

Mariuss
Posts: 19
Joined: 24 Sep 2017, 21:17

Re: Visibility temperatures

Post by Mariuss » 24 Sep 2017, 23:14

+1

Aimak
Posts: 2
Joined: 26 Dec 2016, 23:14

Re: Visibility temperatures

Post by Aimak » 26 Oct 2017, 12:07

Today, I posted about the same request:
https://forum.netatmo.com/viewtopic.php?f=20&t=9385

I'm surprised that just a handful of users are interested on this feature.

stefanbanu
Posts: 3
Joined: 02 Feb 2018, 13:20

Re: Visibility temperatures

Post by stefanbanu » 02 Feb 2018, 13:45

I agree and I'm interested too.
Any other "classic" thermostat display current temperature in a BIG format and setted temperature in small format.
I think, from user experince point of view, is more important to see this three informations:
- BIG format: current ambient temperature
- Small format: setted temperature (and if possible current schedule's start/stop time)
- Very small format: heating on/off ( a simple dot in bold/hollow format should be enough). Now I need to watch the relay to know this, but my relay is not visible from my room where is the thermostat installed
Thanks

spanzetta
Posts: 14
Joined: 03 Jan 2018, 14:29

Re: Visibility temperatures

Post by spanzetta » 03 Feb 2018, 11:58

+1

LegyT
Posts: 2
Joined: 25 Jan 2018, 08:14

Re: Visibility temperatures

Post by LegyT » 03 Feb 2018, 23:00

I have the same problem. Both temperatures should be bold.

Penik
Posts: 10
Joined: 11 Jun 2016, 16:01

Re: Visibility temperatures

Post by Penik » 04 Feb 2018, 07:19

+1

Marmitol
Posts: 2
Joined: 06 Feb 2018, 14:10

Re: Visibility temperatures

Post by Marmitol » 06 Feb 2018, 14:18

+1

Post Reply

Return to “General questions”