The radiator hums and the stove overheats

Post Reply
Hatrick
Posts: 9
Joined: 30 Jan 2021, 14:17

The radiator hums and the stove overheats

Post by Hatrick »

I have a problem with humming radiators and exceeding the temperature of the stove after connecting netatmo products.

I have a gas stove - Termet mini term turbo - I have a netatmo thermostat connected to the stove and 7 heads on the radiators

My settings:
Priority: Comfort
Auto adapt: ​​enabled
PID: active
Window detection: enabled
Temperature set on the stove 60 degrees

Radiators vented
Correct furnace pressure 1.2

The problem of radiator noise appears only when one radiator is heated. On the other hand, the temperature on the stove rises very quickly and soon exceeds the maximum value of 60 degrees. The stove blocks the heating. The message L3 appears on the stove.
According to the instructions, this means that the maximum temperature has been exceeded and the stove stops heating, but the pump continues to supply water to this one radiator. And the stove cools for 3 minutes.
The radiator humming occurs at this point. After the message L3.
After 3 minutes, the stove turns back on, it exceeds the temperature very quickly and again the message L3.
It happens all the time, with any radiator. Before that, I had no problem
Post Reply

Return to “General Questions”