Firmware updates

Locked
Brieuc_Netatmo
Posts: 3088
Joined: 02 Jan 2014, 11:20

Firmware updates

Post by Brieuc_Netatmo »

Update process: everything is automatic, no action on your part is required! We make sure that all products always have the latest features available.
The latest firmwares that have passed our internal validation processes are progressively pushed towards each eligible active product.
We gradually increase the percentage of updated products and carefully monitor each step. The deployment can thus be spread over several weeks.
The Relay is the first module to receive the new firmware from our servers. Then, it transmits their updates to all the modules paired to it (Thermostat and/or Valves). This process can take up to 72 hours depending on the number of modules to update and the quality of the radio link between the Relay and each of them.

---
Please find below the changelog of the Smart Modulating Thermostat firmwares:


v22 (Relay) / v6 (Thermostat) / v89 (Valves) – November 16, 2021:
- Fixed the heating curve setting which was not correctly applied
- Add a "flame" logo on the Thermostat when the heating is ON
- Display the anticipated temperature when the Thermostat is anticipating the next time slot
- Changed the default Frost-Guard temperature
- New Valve firmware with battery management optimizations
- Various other bug fixes and improvements.


v20 (Relay) / v6 (Thermostat) / v85 (Valves) – June 21, 2021:
- Fixed a bug happening when the button of the Relay was pressed
- Various other bug fixes and improvements.


v19 (Relay) / v5 (Thermostat) / v85 (Valves) – May 25, 2021:
- Add measures to allow the display of "Boiler ON" duration in the temperature graphs.
- Add measures to be able to calculate advanced heating algorithms and advanced anticipation.
- Add missing domestic hot water features.
- Various others bug fixes and improvements.


v17 (Relay) / v5 (Thermostat) / v85 (Valves) - February 18, 2021:
- Changed the OpenTherm protocol architecture to improve reading information from the boiler.
- Fixed the Heating Prediction not working correctly at the end of Away or Frost-Guard mode.
- Fixed a bug: the heating schedule was sometimes not applied by the Thermostat due to the action schedule erasing the heating schedule (only for users with Legrand products).
- Various others bug fixes and improvements.


v15 (Relay) / v5 (Thermostat) / v83 (Valves)- December 21, 2020:
- Fixed the Manual Boost request from a Valve not working.
- Fixed the Heating Prediction feature.
- Fixed the domestic hot water temperature setting on instantaneous hot water: it is now only set for a water heater.


v14 (Relay) / 5 (Thermostat) - November 17, 2020:
- The Relay can now turn ON a water tank connected to an OpenTherm boiler.
- The Wi-Fi configuration method has been updated.
- Various others bug fixes and improvements.


v11 (Relay) / v5 (Thermostat) / v83 (Valves) - October 29, 2020:
- Initial public release
Brieuc - Netatmo Team
Locked

Return to “General Questions”