Please advice,
I have the relay connected but when I push the relay button the green light goes on and push again it is switched off.
Got the thermostat connected and when I set it to 30 degree the light of the relay switch on and off again when I set it to low temperatuur.
But no reaction is seen on the boiler ????
Before I had the old Netatmo and worked fine but with the opentherm version no reaction
Did switched from on/off to modulating so it correctly connected ( I am a electrical engineer ) so not a newby
Please advice what I can do
Daalderop Comfort 24/80+ Opentherm
Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle
Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle
Last edited by GEORGzer on 07 Nov 2020, 10:27, edited 1 time in total.
Reason: title adapted
Reason: title adapted
Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle
Update:
when I push the relay you hear and feel a click just like the old Netatmo thermostat
So I connected it to the on and off switch and it works perfect in off/on mode !!!!!
Can it be a mixed up at Netatmo that I got a wrong relay ???
My old thermostat (Opentherm not from Netatmo) when switched on and off does not make a click sound at all, and the one from Netatmo modulating version and the old one from Netatmo both have a relay clicking sound ???????
How is this possible ????
Please Netatmo help and advice
Greetz Remy
when I push the relay you hear and feel a click just like the old Netatmo thermostat
So I connected it to the on and off switch and it works perfect in off/on mode !!!!!
Can it be a mixed up at Netatmo that I got a wrong relay ???
My old thermostat (Opentherm not from Netatmo) when switched on and off does not make a click sound at all, and the one from Netatmo modulating version and the old one from Netatmo both have a relay clicking sound ???????
How is this possible ????
Please Netatmo help and advice
Greetz Remy
Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle
🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶 Help anyone ?
Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle
Did you connect the OpenTherm Relais to the same terminals like the old „analog“ Relais was or does this boiler have dedicated terminals for analog/OpenTherm?
I can’t manage to find the correct technical manual.
I can’t manage to find the correct technical manual.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle
Hi here you have the file with wetransfer
https://we.tl/t-DVNjRpJs4t
https://we.tl/t-DVNjRpJs4t
Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle
Thanks.
Ok, so if you connected the OpenTherm Relais to the „K3“ terminal, then this can‘t be the issue.
I‘m sorry, I don‘t have any experience with the new Thermostat yet.
You could try to contact Netatmo directly through the helpcenter.
Ok, so if you connected the OpenTherm Relais to the „K3“ terminal, then this can‘t be the issue.
I‘m sorry, I don‘t have any experience with the new Thermostat yet.
You could try to contact Netatmo directly through the helpcenter.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle
Yes its connected the right way on K3 checked the connection with a multimeter so it should be working fine
Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle
Can you see if I have the right relay with this number ?
- Attachments
-
- 1C330EA8-C3F9-43B1-978A-1E6309F7FD6D.jpeg (130.68 KiB) Viewed 2037 times
Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle
Here is the relay
- Attachments
-
- 98AB8CD5-2A81-4389-BF45-2FE1B8AA4C7D.jpeg (2.74 MiB) Viewed 2037 times
Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle
I‘m sorry, I‘m not a Netatmo employee.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors
Not a Netatmo employee