Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle

Remy47
Posts: 13
Joined: 07 Nov 2020, 09:57

Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle

Post by Remy47 »

Please advice,

I have the relay connected but when I push the relay button the green light goes on and push again it is switched off.
Got the thermostat connected and when I set it to 30 degree the light of the relay switch on and off again when I set it to low temperatuur.

But no reaction is seen on the boiler ????

Before I had the old Netatmo and worked fine but with the opentherm version no reaction

Did switched from on/off to modulating so it correctly connected ( I am a electrical engineer ) so not a newby :)

Please advice what I can do

Daalderop Comfort 24/80+ Opentherm
Last edited by GEORGzer on 07 Nov 2020, 10:27, edited 1 time in total.
Reason: title adapted
Remy47
Posts: 13
Joined: 07 Nov 2020, 09:57

Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle

Post by Remy47 »

Update:

when I push the relay you hear and feel a click just like the old Netatmo thermostat
So I connected it to the on and off switch and it works perfect in off/on mode !!!!!

Can it be a mixed up at Netatmo that I got a wrong relay ???

My old thermostat (Opentherm not from Netatmo) when switched on and off does not make a click sound at all, and the one from Netatmo modulating version and the old one from Netatmo both have a relay clicking sound ???????

How is this possible ????

Please Netatmo help and advice

Greetz Remy
Remy47
Posts: 13
Joined: 07 Nov 2020, 09:57

Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle

Post by Remy47 »

🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶🥶 Help anyone ?🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
GEORGzer
Posts: 2663
Joined: 14 Jan 2014, 18:14

Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle

Post by GEORGzer »

Did you connect the OpenTherm Relais to the same terminals like the old „analog“ Relais was or does this boiler have dedicated terminals for analog/OpenTherm?

I can’t manage to find the correct technical manual.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors

Not a Netatmo employee
Remy47
Posts: 13
Joined: 07 Nov 2020, 09:57

Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle

Post by Remy47 »

Hi here you have the file with wetransfer
https://we.tl/t-DVNjRpJs4t
GEORGzer
Posts: 2663
Joined: 14 Jan 2014, 18:14

Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle

Post by GEORGzer »

Thanks.

Ok, so if you connected the OpenTherm Relais to the „K3“ terminal, then this can‘t be the issue.
I‘m sorry, I don‘t have any experience with the new Thermostat yet.

You could try to contact Netatmo directly through the helpcenter.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors

Not a Netatmo employee
Remy47
Posts: 13
Joined: 07 Nov 2020, 09:57

Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle

Post by Remy47 »

Yes its connected the right way on K3 checked the connection with a multimeter so it should be working fine 🤦🏻‍♂️🤷🏻‍♂️😢
Remy47
Posts: 13
Joined: 07 Nov 2020, 09:57

Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle

Post by Remy47 »

Can you see if I have the right relay with this number ?
Attachments
1C330EA8-C3F9-43B1-978A-1E6309F7FD6D.jpeg
1C330EA8-C3F9-43B1-978A-1E6309F7FD6D.jpeg (130.68 KiB) Viewed 2032 times
Remy47
Posts: 13
Joined: 07 Nov 2020, 09:57

Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle

Post by Remy47 »

Here is the relay
Attachments
98AB8CD5-2A81-4389-BF45-2FE1B8AA4C7D.jpeg
98AB8CD5-2A81-4389-BF45-2FE1B8AA4C7D.jpeg (2.74 MiB) Viewed 2032 times
GEORGzer
Posts: 2663
Joined: 14 Jan 2014, 18:14

Re: Daalderop Comfort 24/80+ - Relay not working no reaction from the kettle

Post by GEORGzer »

I‘m sorry, I‘m not a Netatmo employee.
Home: Weather Station (V3 + Rain & Wind Gauge, 3 additional Indoor Modules, Shield), Valves Starter Pack + 7 Valves, Video Doorbell
Office: Thermostat (V2), Healthy Home Coach, Smoke Alarm, 2 2in1 Sensors

Not a Netatmo employee
Post Reply

Return to “Attaching the Thermostat to the boiler”